35mm Wide High-Temperature Kapton Polyimide Tape
Applications: PCB Masking, High Temperature Clamping, Keypad and Membrane Switch Applications,Surface Protection, Splicing of Silicone Papers and Films, Powder Coating Masking andElectroplating.
Features:Employs a proprietary technology that results in extremely low electrostatic discharge at unwinding and removal from SUS. Conventional polyimide tape typically generates over 10,000 volts during use which can damage electronic components. The low static properties of our tape can eliminate circuit board degradation.
Storage Environment: Store under normal conditions of 10C. to 30C. and 40 to 70% relative humidity in theoriginal packaging.
Technical Data:
Backing Thickness_ 0.025mm
Total Tape Thickness_ 0.060mm
Adhesion to Steel: 1.4N/cm Test method GB-T2972
Tensile Strength at Break: 58N/cm Test method GB-T7753
Elongation at Break: 60% Test method GB-T7753
Upmost use Temperature: 260C
Surface Resistance: 10 6~8 ohms
Removal from roll: <100V
Static Charge:
FromSUS: <50V
Dielectric Strength: 4000 Volts Test method GB/T7752-87
Thermal Conductivity: =0.12 W/m.K
Ingredient C.A.S. No % by Wt
Polyimide Backing 25038-81-7 99.40%
MQ Resin 56275-01-5 0.42%
Siloxanes and Silicones 68083-14-7 0.18
Not classified as hazardous to users.
|