4 stroke air cooled Zongshen 250cc ZS167MM engine
Gear Shift lever
Manifold & seals
Front sprocket cover
PZ30 carby
Air filter
Completer wiring harness
| Model | ZS167FMM (CG250) push rod |
| Manufacturer | Chongqing Zongshen |
| Type | Single-cylinder, vertical, four-stroke, air-cooled |
| Maximum power and corresponding speed kW / (r / min) | 11.5 / 6500 |
| Rated power and corresponding speed kW / (r / min) | 11.0 / 6500 |
| Maximum torque and corresponding speed N ? m / (r / min) | 17.5 / 5500 |
| Minimum Idling speed r / min | 1400 ± 100 |
| Cylinder diameter mm | 67 |
| Piston stroke mm | 65 |
| Total displacement ml | 229.2 |
| Compression ratio | 9.2:1 |
| Ignition timing | Before TDC 15 ° (1400r/min) |
| Inlet | The following set camshaft |
| Ignition | C.D.I electronic ignition |
| Lubrication | Pressure, splash compound |
| valve clearance mm | 0.05-0.07 |
| Clutch type | Manual wet multi-plate |
| Change file mode | Constant mesh five-speed two-stage variable speed drive |
| Reduction ratio | "Primary: 3.333; a file: 2.909,Second gear: 1.867; third gear: 1.389,Fourth gear: 1.150; five files: 0.9545 " |
| Starting method | Electric start |
| Spark Plug Type | 16T 428 |
| Oil grade | SF15W / 40 |
| ML total capacity of oil | 1100 |
| Dimensions mm | 358 × 324 × 458 |
Important Notes:
Shipping Surcharge may apply to some regional areas, please kindly contact us for confirmation. Otherwise, shipping invoice will be sent after purchased
Thanks. ...