Description:
This RC-6 remote control acts as a wireless shutter release capable of instantly triggering the shutter without
disturbing the camera. It allows you to include yourself in the photo and take picture whenever you are ready.
It can trigger the camera shutter release remotely from a distance. The compatible
camera has a built-in infrared receiver for this remote trigger device. It is ideal for taking pictures of
subjects that are difficult to approach, or to minimise vibration for close-up and time exposure.
When in Use, Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the and press the shutter-release button on the remote control (when using the remote outdoors, make sure that the subject is not back-lit and that the line of sight between the transmitter and the infrared receiver is not covered by the lens or other obstacles).
How the camera focuses and shoots depends on the option selected camera setting. For further information check your camera Operating manual.
Operates from up to 3 - 5 metres Distance.
Operates with all camera remote control modes (Quick-response, Delayed and Bulb).
High quality Remote Control Made By Third Party Manufacturer
Compared with the self-timer function, the remote control give you more time before shooting.
With a switch to delay 2 seconds.
Compact and portable design
Can be put easily into your pocket or on a key-chain.
EOS 7D Mark II
EOS 77D
EOS 800D
EOS 5D Mark lV
EOS 5D sr
EOS 5D s
EOS 90D
EOS 80D
EOS 760D
EOS 750D
EOS 7D Mark II
EOS 70D
EOS 700D
EOS 100D
EOS 5D Mark lll
EOS 5D Mark II
EOS 6D
EOS 7D
EOS 60D
EOS 500D
EOS 550D
EOS 650D
EOS 600D
EOS 450D
EOS 350D
EOS 300D
and any other canon models which support IR remote control mode.
( NOTE: RC-6 remote will NOT Operate EOS 1D, EOS 5D, EOS 10D, EOS 20D, EOS 30D, EOS 40D, EOS 50D, EOS 1100D, EOS 1200D, EOS 1300D, EOS 2000D, EOS 4000D)
For Customer Attention:
We are based in UK. Therefore, we can send the goods immediately and as soon as possible after purchase.
Payment:
Payment Preferred through Paypal system. You can also use a bank card. All bank cards are accepted.
For customer convenience and a faster delivery these options are available:
Royal Mail 1st Class (1-2 working days)
Royal Mail 2nd Class (2-3 working days)
For deliveries outside UK these options are available :
Royal Mail International Standard (Small Packets)
Please ensure your order contains the correct shipping address.
Returns:
We accept returns within 14 days from date you received the purchase.
Feedback:
Customer satisfaction is very important to us. If you have any problems with your order,please contact us and we will do our best to Remedy any Problems, please do not leave negative feedback. We guarantee that your issue will be solved quickly.
Please leave a positive feedback for us. Your feedback is very important to us. We will leave a positive feedback for you.
Contact details:
If you have any questions, please feel free to contact us through the eBay emailing system. We will try to reply as soon as possible. We hope you can give us the chance to improve our service and resolve any problems you might have.
Thank you for looking at our listing You're welcome to look at other items we sell.
Kind regards,
SJB
Using the RC-6 REMOTE CONTROL
The RC-6 is a very simple device, controlled by just a button and a switch. Make sure the Camera drive mode is set to Remote Control Mode. Aim the small black arrow in the silver circle at the camera and press the button to fire the shutter. A switch on the back gives the option of immediate firing (‘•’), or firing with a 2-second delay.
Line of sight
Infrared devices normally need to see each other – often known as ‘line-of-sight’. Based on this, it would seem that you can only use the RC-6 from in front of the camera, and you will find this quoted in some reviews. But it’s not strictly true. If you hold the RC-6 a few inches above the shutter release, aiming down, the shutter will fire when you press the remote button – useful as an alternative to a remote switch. It will even operate from behind the camera if the infrared beam is reflected back from a nearby surface.
When aimed from the front of the camera the range is given as Max 5 metres, though this will vary with the surroundings.
Infrared devices can be affected by fluorescent lighting, but we have not experienced any problems
As you can see above, the sensor for the RC-6 is on the front of the camera (EOS 550D shown, but the sensor is in a similar position on other compatible cameras).
Problems?
We regularly receive complaints about the RC-6 from photographers who say it is faulty. Generally it is not. Here are two things to check
Drive mode - The camera must be in the Self-timer/Remote Control mode for the RC-6 to operate. Some cameras have more than one self-timer mode – you must use a mode with the symbol of a remote control unit. Pressing the shutter button in this mode gives you a 2 or 10-second self timer delay. Pressing the button on the RC-6 fires the shutter immediately (or with a 2-second delay).
Auto Power - The RC-6 will only operate when the camera is switched on. If your camera automatically switches off after 30 seconds without use – one of the settings on the ‘Auto power off’ menu – it does not give much time to move round to the front of the camera and fire. We set ‘Auto power off’ to ‘Off’ when using the RC-6 – the camera stays on until we turn the camera off. It’s a good idea to reset the ‘Auto power off’ to ‘1 minute’ or similar at other times to avoid draining the battery.
Liability :- I assume no responsibility for any damage or injury of any kind arising from misuse or improper application of any parts in any way by any person. I have no control over the manufacturing, testing or usage of any part sold, therefore the manufacturer will be responsible for any and/or all claims for damage to person(s) or property arising from design, manufacturing, and testing of its products. Under no circumstances will I be liable for consequential or indirect damages