ANCEL EVAP Machine Series:  Introduction: ANCEL S3000 is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on pipe system quickly and exactly ,such as : Intake System Test, Exhaust Systems Test, Car Sealing Test, Fuel Tank System Test. ANCEL S3000 Advanced Technology ✔️ Crankcase system test ✔️ Intake System Test ✔️ Car Sealing Test ✔️ Fuel Tank System Test ✔️ Turbo System Test ✔️ EVAP System Test ✔️ Exhaust Systems Test ✔️ Various Pipe Fittings Test  Specification:
How to do leakage test? 1. Turn OFF the ignition of the vehicle. LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF. 2. Dismantle the air filter and the throttle connections. 3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake Adapter into the opening. 4. Connect the Power Cord to 12V vehicle battery. 5. Now the Power LED would be ON, if else check the power supply. 6. Introduce the smoke nozzle into the system via the Adapter Cone. 7. Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter 8. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle. 9. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist. 10. After test, press Smoke Control Switch again to stop the unit from generating smoke and press Air Control Switch to stop generating pressurized air. 11. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.  Why it "Not Smoking"? Such equipment has several elements, gas, electricity, e-liquid, all of which are indispensable. Please follow the steps below to check first. if there is still any problem, please contact me, and provide photos or videos so that we can judge whether it is a device quality problem or improper operation.  ANCEL S3000 Main Features:
Leak Status Indication NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system. Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system. Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.  ANCEL S3000 Packing List 1*Power Cord: To offffer connection from the unit to the automobile battery, in order to drive the unit. 1*Funnel: Assistance method for smoke oil refifill, to prevent pour oil to the unit surface. 1*Hook up: To hang the somke machine in the car 1*User Manual: Detailed descriptions about how to use the smoke machine automotive. 1*Intake Bladder: To fifit the intake and exhaust, seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape. 1*Adapter Cone: To fifit the intake and exhaust, seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation. 1*Replacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder. 1*Smoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.
|
