1.2m Wishbone Lever Extractor Ball Joint Bottom Arm Control Suspension Pry Tool

1.2m Wishbone Lever Extractor Ball Joint Bottom Arm Control Suspension Pry Tool

DETAILS

 Designed for use for pushing down the wishbone and other suspension parts during the servicing of the driver shaft gaiter or during the replacement of the wheel bearing.

 1.18m in length.

 Comfortable rubber grip.

 Adjustable canter lever hook.

 Sliding adjustment for easy positioning.

 INCLUDES

 Material: Cr-Mo Steel W/Steel tube Blue Finish.

 Size 1180mm Length.

 Move the sliding groove to adjust the position to make removing easier.

 Use lever to push down the wishbone and other suspension parts

  e.g. during the disassembly of the drive shaft,

 during replacing the gaiter or exchange of the wheel bearing.

 After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support.

 This prevents problems such as:

 - the joint wedges again in the cone, after it was pressed down briefly with a tyre lever.

 - the ball joint or gaiter get damaged.

 - the mechanic injures himself or damages suspension parts when the tyre lever slips away.