12826943 Windshield Washer Pump Motor for SAAB 9-3 2004-2009 2010 2011 2012
Description:
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.
Specification:
- Fit the line to the washer nozzles (the discharge line).
- Great Replacement for Failed Pump - to give the needed power to bring the windshield fluid to the window
- To push fluid through the washer nozzle out onto your windshield to wash away the dirt
- This is non-OEM product.
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.
Specification:
- Color: Black,White
- Material: Plastic
- Part Number: 12826943
- Size: 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H)
- Pin Number: 2
- for SAAB 9-3 2004-2012
- 1 x Windscreen Washer Pump
ITEM SPECIFICS
| Brand | X AUTOHAUX |
| Manufacturer Part Number | Does Not Apply |
| Type | Washer Pump |
| Material | Plastic |
| Product Name | Windscreen Washer Pump |
| Net Weight | 195g |
| Shell Color | Black,White |
| Dimension | 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H) |
| Package Content | 1 x Windscreen Washer Pump |
| upc | 752374272346 |
YOU SHOULD KNOW
- If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay!
- Our Handling Time: within 24 hours on weekdays
- eBay Handling Time: 72 hours
- We are suplier of aftermarket automotive parts and accessories under the brand of X AUTOHAUX.
- Our mission is to supply quality parts for your car at affordable prices. We are automotive professionals dedicated to offering you the latest automotive aftermarket parts and accessories any time of the day.
- We work hard with our suppliers to find the best products, at reasonable prices with the highest level of customer service.
- Our warehouse staff is ready to process all of your orders and ensure they get to you in the quickest and safest way.
- We work hard to safely and securely ship your order in the least amount of time.
- Storewide free shipping in United Kingdom.
- All our items will be shipped to buyer's address, please confirm your address on eBay before you purchase.
- Taxes and other charges are included in the item price or shipping charges. Buyers are responsible for these charges.
- We only accept Paypal.
- Payment must be received within 7 days of auction closing. According to eBay guidelines, all unpaid purchases case will be opened automatically.
- If you need to specify the color or other information for the items you purchased, please Click here to contact us directly with item # and your eBay ID.
We offer a 30 day return policy. This is under the following conditions:
- The item must be unused and in a resalable condition otherwise are not eligible for a refund.
- All items returned by post are returned at your expense, we cannot be held responsible for this.
- Please use a traceable service.
- Generally we answer emails within 24 hours (excluding weekends & holidays).
- Questions or comments? We welcome your inquiry! Please feel free to contact us directly.
12826943 Windshield Washer Pump Motor for SAAB 9-3 2004-2009 2010 2011 2012
Description:
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.
Specification:
- Fit the line to the washer nozzles (the discharge line).
- Great Replacement for Failed Pump - to give the needed power to bring the windshield fluid to the window
- To push fluid through the washer nozzle out onto your windshield to wash away the dirt
- This is non-OEM product.
1. apply parking brake, turn the front wheel all the way to the left, turn off vehicle and remove keys from ignition
2. remove Phillips screws in wheel well lagging to get access to washer tank
3. took an old plastic cutting board (thin flexible plastic) and fold into a U shape and place under washer pump/tank area, other end in bucket. If the tank is not drained, all but an inch of fluid will drain out when you pull the pump.
4. disconnect electrical connector, tuck out of the way.
5. tilt pump forward to free it from the top clip and pull it upwards out of the tank. you may have to pull the grommet to remove; washer fluid from tank ran down through "U" catch and into bucket.
6. remove hose from old pump, snip off 1/4 inch of the end that is deformed and brittle and attached to new pump.
7. insert new pump into washer tank and wipe up any fluid drips on / around tank.
8. attach electrical connector
9. turned on car, test pump; turn off car, remove keys from ignition.
10. replace wheel well lagging and Phillips screws.
11. refill washer tank, clean up work area.
Specification:
- Color: Black,White
- Material: Plastic
- Part Number: 12826943
- Size: 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H)
- Pin Number: 2
- for SAAB 9-3 2004-2012
- 1 x Windscreen Washer Pump
ITEM SPECIFICS
| Brand | X AUTOHAUX |
| Manufacturer Part Number | Does Not Apply |
| Type | Washer Pump |
| Material | Plastic |
| Product Name | Windscreen Washer Pump |
| Net Weight | 195g |
| Shell Color | Black,White |
| Dimension | 13x5x6cm / 5.12"x1.97"x2.36"(L*W*H) |
| Package Content | 1 x Windscreen Washer Pump |
| upc | 752374272346 |
YOU SHOULD KNOW
- If you have any questions, please feel free to contact our customer service.Our response will be faster than eBay!
- Our Handling Time: within 24 hours on weekdays
- eBay Handling Time: 72 hours
- We are suplier of aftermarket automotive parts and accessories under the brand of X AUTOHAUX.
- Our mission is to supply quality parts for your car at affordable prices. We are automotive professionals dedicated to offering you the latest automotive aftermarket parts and accessories any time of the day. We work hard with our suppliers to find the best products, at reasonable prices with the highest level of customer service.
- Our warehouse staff is ready to process all of your orders and ensure they get to you in the quickest and safest way.
- We work hard to safely and securely ship your order in the least amount of time.
- Storewide free shipping in United Kingdom.
- All our items will be shipped to buyer's address, please confirm your address on eBay before you purchase.
- Taxes and other charges are included in the item price or shipping charges. Buyers are responsible for these charges.
- We only accept Paypal.
- Payment must be received within 7 days of auction closing. According to eBay guidelines, all unpaid purchases case will be opened automatically.
- If you need to specify the color or other information for the items you purchased, please Click here to contact us directly with item # and your eBay ID.
We offer a 30 day return policy. This is under the following conditions:
- The item must be unused and in a resalable condition otherwise are not eligible for a refund.
- All items returned by post are returned at your expense, we cannot be held responsible for this.
- Please use a traceable service.
- Generally we answer emails within 24 hours (excluding weekends & holidays).
- Questions or comments? We welcome your inquiry! Please feel free to contact us directly.