1 pair (2 bulbs) of new high-quality bright 2100 lumens (each) LED bulbs for garden tractors/mowers and others. They fit into your headlight wiring harness sockets. They are brighter, last longer, use less volts, and will not melt your lens if kept on too long. These are non-polarity bulbs. Just plug them in. It's as easy as changing a light bulb. Be safer with brighter lights.
These modern LEDs replace older style single contact incandescent bulbs that are used in many tractors, snow blowers, and mowers. Please see pictures for bulb style and base style.
They are custom made and have a front projection lens, the beam angle is 360 degrees, a steel base, and an alloy body. One of the brightest bulbs in its class; over 2100 lumens each. However, it is the front projections that makes them so effective. They are better engineered than other bulbs.
Item details:
This product is a new type of White light source for vehicles, which has passed the CE standard certification. The whole lamp is pollution-free, no noise, no electricity Sub-interference, due to the use of German advanced constant current control technology, uniform light emission, full light color, and lasting constant.
Product parameters:
Working voltage: 12VDC
Color temperature range: 6000K-7000K
Luminous color: White light
Peak luminous angle: 360°
Features:
1. Good sealing: waterproof, high temperature resistance, corrosion resistance;
2. High brightness: 10000-12000MCD;
3. Energy saving: 5W is equivalent to the brightness of 40W tungsten lamp;
4. Safety: 12V safety voltage, double insulation;
5. Longevity: The service life of the light source is 50,000 to 100,000 hours;
6. Simple installation: just replace the original car bulb directly.
7. It can be used as front and rear headlights,fog lights/brake lights/reversing lights/turn lights, etc.
8. The model is the same as the original car, no need to change the line, just Plug & Play.
9. There is no delay in lighting, and the response time is fast. Without filament structure, the vehicle control circuit is not easy to oxidize.
10. Low energy consumption, high brightness, higher cost performance.
11. Rich in color and pure color, DIY can be done at will, highlighting personalized lighting.
12. Cold light source, good comfort, belongs to the green environmental protection light source.
Installation Precautions:
The original car glass lamp is very hot. Please be careful when replacing it. The LED has positive and negative poles.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
These modern LEDs replace older style single contact incandescent bulbs that are used in many tractors, snow blowers, and mowers. Please see pictures for bulb style and base style.
They are custom made and have a front projection lens, the beam angle is 360 degrees, a steel base, and an alloy body. One of the brightest bulbs in its class; over 2100 lumens each. However, it is the front projections that makes them so effective. They are better engineered than other bulbs.
Item details:
This product is a new type of White light source for vehicles, which has passed the CE standard certification. The whole lamp is pollution-free, no noise, no electricity Sub-interference, due to the use of German advanced constant current control technology, uniform light emission, full light color, and lasting constant.
Product parameters:
Working voltage: 12VDC
Color temperature range: 6000K-7000K
Luminous color: White light
Peak luminous angle: 360°
Features:
1. Good sealing: waterproof, high temperature resistance, corrosion resistance;
2. High brightness: 10000-12000MCD;
3. Energy saving: 5W is equivalent to the brightness of 40W tungsten lamp;
4. Safety: 12V safety voltage, double insulation;
5. Longevity: The service life of the light source is 50,000 to 100,000 hours;
6. Simple installation: just replace the original car bulb directly.
7. It can be used as front and rear headlights,fog lights/brake lights/reversing lights/turn lights, etc.
8. The model is the same as the original car, no need to change the line, just Plug & Play.
9. There is no delay in lighting, and the response time is fast. Without filament structure, the vehicle control circuit is not easy to oxidize.
10. Low energy consumption, high brightness, higher cost performance.
11. Rich in color and pure color, DIY can be done at will, highlighting personalized lighting.
12. Cold light source, good comfort, belongs to the green environmental protection light source.
Installation Precautions:
The original car glass lamp is very hot. Please be careful when replacing it. The LED has positive and negative poles.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.