Red Dot Finder Scope Star Pointer for Celestron 80EQ 80DX 90DX SE SLT Telescope
Product Description
Features:
High quality of materials.
Simple, affordable, and effective red dot sighting device makes aiming your telescope
Very easy to adjust. Thumbwheels allow positioning of the red dot horizontally and vertically for precise telescope alignment
An adjustable small red LED dot is projected onto a non-magnifying viewing window so you can aim the main telescope quickly and easily
Dovetail groove with the bastplate, Includes Mount Bracket
This Red Dot Finder Scope for 80EQ SE SLT Series and so on Astronomical Telescopes
How to use:
First of all pull out the clear plastic sheet that is at the front and on the bottom - you can see this in one of the photos. This allows the battery to make contact so that the red dot appears when you switch it on.
Next, try the finder by switching it on with the small rotary control on the side. Look through the hole at the front of the finder and you should see the red dot and be able to make it brighter or dimmer by using that rotary control which is also the on/off switch.
Now set your scope up as normal but put the red dot finder on instead of the usual optical finder.
Point your telescope to something like a TV aerial or a chimney - anything about that size will do, and the further away the better. Looking through a low power eyepiece (25mm is ideal) find the object by adjusting your telescope and focus the object. Adjust the mount using the slow motion controls so that the object is right in the center of the view.
Adjust the finder so that the red dot is exactly on the object you were looking at. You can adjust it by using the two larger wheels. The one on the right at the front does the left/right direction and the one at the back on the bottom does the up and down.
Switch it off and wait until dark
You now use it by switching the finder on, then looking through the finder so that the red dot lines up on to the target you are going to observe through your telescope. Once the red dot is exactly over the star or planet it should be exactly in the center of your eyepiece view.
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1* Red Dot Finder Scope
High quality of materials.
Simple, affordable, and effective red dot sighting device makes aiming your telescope
Very easy to adjust. Thumbwheels allow positioning of the red dot horizontally and vertically for precise telescope alignment
An adjustable small red LED dot is projected onto a non-magnifying viewing window so you can aim the main telescope quickly and easily
Dovetail groove with the bastplate, Includes Mount Bracket
This Red Dot Finder Scope for 80EQ SE SLT Series and so on Astronomical Telescopes
How to use:
First of all pull out the clear plastic sheet that is at the front and on the bottom - you can see this in one of the photos. This allows the battery to make contact so that the red dot appears when you switch it on.
Next, try the finder by switching it on with the small rotary control on the side. Look through the hole at the front of the finder and you should see the red dot and be able to make it brighter or dimmer by using that rotary control which is also the on/off switch.
Now set your scope up as normal but put the red dot finder on instead of the usual optical finder.
Point your telescope to something like a TV aerial or a chimney - anything about that size will do, and the further away the better. Looking through a low power eyepiece (25mm is ideal) find the object by adjusting your telescope and focus the object. Adjust the mount using the slow motion controls so that the object is right in the center of the view.
Adjust the finder so that the red dot is exactly on the object you were looking at. You can adjust it by using the two larger wheels. The one on the right at the front does the left/right direction and the one at the back on the bottom does the up and down.
Switch it off and wait until dark
You now use it by switching the finder on, then looking through the finder so that the red dot lines up on to the target you are going to observe through your telescope. Once the red dot is exactly over the star or planet it should be exactly in the center of your eyepiece view.
Remember to switch it off once you have found your target to save the battery.
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1* Red Dot Finder Scope
* We accept only PayPal payment.
* All PayPal Payments must be Confirmed (Shipping and billing addresses must match)Payment is required within 7 days from the date of the auction ending
A non-payment dispute will be automaticcally opened if full payment is not received after 14 days of auction.
* We will ship your item(s) within 5 working day by Speedpak or China Post.
* We can also provide express post by DHL/FEDEX(5-7 days) . The cost is higher than standard postage, about $ 20 or higher. If you want post by EMS or DHL, please contact us.Very reasonalbe shipping fee will be charged.
* Return is accepted within 30 days after the buyer's receiving the item. (Excluding contrived damagement or misusage).100% money-back Guaranteed!
* All product will be tested in 100% before delivery.If the item is defected by the processing of postage, Buyer has up to 30 days from date of receipt for
exchange of a new one. All shipping charges for returned products are to be paid by the seller ,Please contact us for the return address
Copyright © 2021 Dianxiaomi