Features:
1 Support WIFI network. (Attention: The switch module must keep connect with wifi service.)
2 Support three working modes: self-lock, inter-lock and momentary control.
3 Support Max 8 timing tasks for each added device.
4 Support status tracking, home appliances status timely feedback to your App.
Product Specification:
1 Input voltage: AC 85-250V
2 Maximum load: 10A
3 Working temperature: 0-60 centigrade
4 Control method: WIFI + Manual Button Control
5 Channels: 4 Way
6 Switch size: 100*80*28mm
7 Passive output, commonly used as a mechanical switch.
8 Support system: Android/IOS
How to connect phone with switch?
1 Download and install the software of “eWeLink” from APP store or Google play store.
2 Follow “eWeLink” instructions to register an account on it.
3 Log in your account of “eWeLink”.
4 Press any manual control button (S1,S2,S3,S4) for 5 seconds until you see the LED D8 light flash quickly, then release it. Now add device on mobile phone by eWeLink APP according its introduction.
5 Now you can use your phone to control the switch under 2G/3G/4G signal.
6 You can name your own device and control it only by yourself.
7 You can also share your device with your family or friends.
How to set working mode?
Supply AC 85-250V power to the relay.
1: Press mode button until you see D9 flash 3 times, release button, now it is self-lock.
2: Press mode button until you see D9 flash 2 times, release button, now it is inter-lock.
3: Press mode button until you see D9 flash 1 time, release button, now it is momentary.
What is the difference between working mode?
1 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF
2 Inter-lock: Press remote button A , receiver CH1 ON, and receiver CH2,CH3,CH4 OFF.
3 Momentary: Keep pressing remote button A, receiver CH1 ON. release button A, then receiver CH1 OFF
Package include:
1 x New 4CH 4 Channel WiFi Wireless Smart Remote Control Switch