|
|
1GB DDR-400 PC3200 Non-ECC Desktop PC (DIMM) Memory RAM 184-pin
|
|
Model Not Applicable
Type SDRAM
Compatibility Desktop
Form factor DIMM
Capacity 1GB (1x1GB)
Upgrade type Generic
Compatible slots 1 x Memory
Manufacturer warranty Lifetime
Specifications
RAM features Unbuffered
Technology DDR SDRAM
Memory speed [MHz] 400
Memory specification compliance PC-3200
CAS Latency timings CL3
Data Integrity Check Non-ECC
Module Configuration 256 x 64
Supply Voltage 2.6
Troubleshooting Tips
Before you do anything, you have to take these precautions: Make sure that you are working in a static safe environment. Remove any plastic bags or papers from your work space. Touch an unpainted metal part of your case before touching your new modules or any other components in your system.
Are you having trouble installing your new memory?
Don't worry, Hopefully you can fix it going through the following steps.
1. Remove and reinstall the modules to make sure that they are seated securely in the socket.
2. Sometimes the connections are not set properly. All you have to do is press the memory in a bit hard. Please be careful. Just press it hard, but don't knock on it as it may damage your motherboard. Make sure the notches in your module are lined up with the keys in the slot, and then press down hard. It can take 20 to 30 pounds of pressure to install a module. The clips on the side of module should snap into place on their own. If you have to move the clips into place by hand, your module isn't installed properly.
3. If that doesn't work, please try cleaning the connectors. You can do that by rubbing nail polish remover across the connectors with a soft cloth. This removes possible carbon deposits from the connectors. You can try pushing the memory in firmly making sure the clips snap in automatically.
Make sure that your new memory is the same type as your old memory (Non-ECC/ECC, Unbuffered/Buffered/Fully Buffered (FB), High Density/Low Density, FPM/EDO/SDRAM). Using incompatible memory would often result in blank screen and no power on self test or a BIOS/CMOS error.
4. Fill your slots starting with the largest density and working to the smallest (put the largest module in slot 0, and the second largest in slot 1, and so on). Some systems go in reverse order, so if this doesn't work, try reversing the procedure. If you get a memory mismatch error follow the prompts to enter setup, then select save and exit. (This is not an error — some systems must do this to update their CMOS settings.)
5. If your system is only reading half of the new module's memory, and the module has chips on both sides, then your system probably will only recognize single-banked or single-sided modules. Please return the memory and request single-sided modules with the same density.
6. Update your BIOS. If your computer is a little bit older, it may need a BIOS (Basic Input Output System) update in order to work with today's technology. Don't worry — updating your BIOS isn't as difficult as it sounds. You just need to contact your system or motherboard manufacturer. If you need an update, they'll probably point you to a Web site where you can download the new software for free. It's usually very easy.
7. Last, but not the least, the problem may be with your operating system. Some versions of Windows do not recognize memories above a certain limited, especially if you are using a 32 bit Windows.
If you are still unable to solve you problem, feel free to contact us and a member of our technical team would try to resolve your problem
|
| Item Specifics |
| Brand : |
Unbranded/Generic |
| MPN : |
Does Not Apply |
We accept PayPal only. •Please understand that for variation listings, there is a drop down menu for you choosing the desired items. We are unable to change any content of your order based on the eBay checkout note or PayPal message. •Please verify your address during checkout . You may not be able to change the shipping address once the payment is completed due to the shipping status. •If you are paying through Paypal using eCheck, please note that your item can be shipped only after eCheck has cleared. We accept PayPal payment and all major credits through Paypal only. •To avoid an unpaid item dispute, all payments must be received within 7 days from the end of the auction.
We ship all the orders from USA For US orders, economy (est 5-10 days) shipping is FREE AND FREE tracking number
Returns: 30 DAYS FREE RETURN!
Contact Us: If you have any questions or concerns, you can reach us through eBay messages. We appreciate your business and if you are satisfied with our service, please provide positive feedback and rate the details of the transaction. Our goal is to make sure you are a satisfied buyer so please give us the chance to do so should anything go wrong with your order. Please contact us before leaving any negative or neutral feedback。
Shipping: We ship to your eBay registered address only. Items will be shipped within 24 hours when payment received. All items are shipped from our USA warehouse in NC, Shipping time only 2-7 business days with tracking number. We ship from US to US. Orders usually ship within 1 business day after payment is received.
Copyright of EZcart LLC. All rights reserved.
|
