Upgraded Multifunctional
Professional Digital Heat Press Machine 110V(8 In1 heat press) |
This upgraded heat press machine has refined
appearance and powerful performance. It adopts the latest
double-tube heating technology to improve the transfer performance. Equipped with
the strong motherboards and accurate temperature
control device, the stability has also been further improved. At the same
time, all the necessary accessories will be provided to ensure the most
beautiful graphics on T-shirts, hats, plates, cups, etc.
|
Voltage |
110V |
|
Power
|
1000W |
|
Frequency |
60hz |
|
Color
|
Black |
|
Length of the Cable:
|
1.5M |
|
Highest Temperature: |
210℃/410°F |
|
Cap Heat Press Machine Power |
150W |
|
Mug Press: |
3"-3.5"diameter (11OZ) |
|
Plate Press #1 |
5" max diameter |
|
Plate Press #2 |
6" max diameter |
|
Transfer Size: |
11.41*14.96in(29*38CM) |
|
Hat/Cap Press: |
6"x 3" (curved) |
|
Mug Heat Press Machine Power: |
280W |
|
1.Interior Detail Design
|
 |
Double Tube Heating
(1).Double-tube heating design ensures the heating
more uniformand the better transfer quality. Compared
with the single tube heating, the temperature difference is only
about 5℃ between the center and the edge.
(2).Compared with the
traditional heat press, the color transferred from the upgraded heat
press is more vivid.
|
|
|
Controller :
(1). Large
screen display, silicone button, simple and intuitive, easy to operate,
with counting function，can count the number of production.
(2).3
modes are free to switch, can quickly make different products. Only need
press one time, easy for customer to get started.The whole set is
developed using plastic molds, which is easy to assemble and easy to
mass produce.
(3).The controller has a
marvelous and gorgeous appearance, it's more sophisticated than
traditional. The entire controller can be quickly replaced by only two
screws, which is convenient for future maintenance. |
|
Mainboard |
 |
|
(1).The whole circuit board is designed according to the American UL
standard, with dual-channel control, SCR temperature control, the
accuracy reaches within 5 degrees.
(2).The 10A relay is used as the second guarantee control. When the first
control fails, the second control automatically switches, which does not
affect the customer's use. Greatly reduce the maintenance proportion of
the controller, such as: the old motherboard has three thousandths of
fault cases, the new motherboard can be controlled within one ten
thousandth.
(3).There is also a mechanical overheat protection switch that protects
the final protection when the motherboard fails.
|
 |
Delicate Design
The workmanship of the heat press 8 in 1 is quite fine such as
the silicone button,
suction foot, aluminum main beam etc.
Silicone button—sensitive
operation, more comfortable feel
Suction foot—The
heat press machine is more stable during use, prevents the
phenomenon of falling down and increases safety
Aluminum main
beam— the spindle will not rust, make the rotation
more convenient.
Rotate freely------ 360°
|
| 2.Accessory
function update
|
 |
(1).The mug
press machine rack uses 2.5mm thickness iron plate, high quality mug heater, with automatictiming switch, no need to manually press the
countdown.
(2).The mug heater is connected and disassembled by knob without
tools, quick disassembly and simple assembly. |
 |
(1).The plate heat press machine uses the aluminum
mold heat conduction method.
(2). The front and back sides are equipped with 8 inch and 10 inch silicon heater. which has larger transfer area,
better effect, no need to be disassembled and assembled, and simple use.
(3).Since there is no heating plate, this transfer method does not cause
malfunction and maintenance, and the service life is longer. This
machine supports to choose the traditional heating pad, if customers who
are not accustomed to this heating method. |
 |
Six-wire baking coaster with automatic
timing function, with a shrink tube at the outlet, more durable, with a
stainless steel iron sheet for easy replacement. |
1. Connet the Cap heat press machine to the main machineand set the
time and temperature.re.
2. Stick the transferred picture on the cap
3.When the temperature reaches,place the cap into the mug heat press machine.
3.Mugs transfer Process:
1. Connet the mug heat press machine to the main machineand set the time and
temperature.
2. Stick the transferred picture on the mug.
3.When the temperature reaches,place the mug into the mug heat press machine.
1 x Hat Press
(Black)
2 x Plate Presses
(The front and back sides are equipped with 8 inch
and 10 inch silicon heater.)
1 x 9 oz roasted coaster
1 x 12 oz roasted coaster
1 x 20oz aluminum pot coaster
1 x Power Cord
1 x Operating Manual
1 x Pair of Gloves
1 x Removable Silicone Pad and Cotton Pad
(Black)
新建网页 2
|
Shipping & Handling
Details |
|
Default Shipping Cost or Free
Shipping Information:
▲ Default
shipping cost or free shipping service is only for the lower 48 United
States by UPS Ground or USPS. Other areas or needs other shipping ways,
please contact us.
▲ Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,
PO Boxes, APO/FPO addresses or other countries/areas, there
WILL be extra shipping costs, please contact us for more detailed
information.
▲ Please
make sure your address is valid for both UPS and USPS services. Any
costs incurred because of incorrect or undeliverable address should be
undertaken by buyer.
Handling Time: Shipping
is usually made in 1-3 business days after payments cleared. Orders are
processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax /
Customs duties: Any
sales taxes or Customs duties are not included. If came out, they must
be undertaken by the buyer. Sales Tax of 8% will be applied for orders
shipped within the state of California.
Damage In
Shipping: Email or
call us First! We will work with you to get the case resolved in the
fastest method. |
|
Return / Refund |
|
If you are not 100% happy with your
purchase, please contact Us. Please don't directly opened a request or
case without informing us, or else, we will do some discounts on the
warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲ All
returns must be made within 14 days of delivery date. Items must be in
new, unused condition, with all original materials included with the
shipment. A partial refund may be applied for opened or damaged items,
depending on the condition.
▲ Items
returned under the buyer’s remorse: The return shipping fee must be
covered by the buyer; The original shipping cost will also be deducted
from the refund. 15% restocking fee of the items purchase price will be
charged.
▲ Returns
that are the result of our seller's error: Buyer will receive a full
refund of the item as well as shipping charges
▲ All
returns require a RA (Return Authorization) number that will be given by
our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲ If
product was received damaged or not as described, please send us some
pictures or videos, so we could well understand your problem, then solve
them for you ASAP. Besides, it's much helpful for us to claim with UPS,
remind our related department to pay much more attention to packaging
later on. Hope for your understanding.
▲ Replacement
or refund of defective or damaged products can only be returned in
exchange for the exact same product, or else, the purchase price will be
refunded back to your original payment method.
▲ If
an item is received damaged, customer service must be contacted within 7
days of receiving your item. All returns require a RA (Return
Authorization) number as above. |
|
Payment |
PayPal: PayPal
preferred only with a confirmed address. We want you to feel secure
in your purchase. Keep everything within PayPal and eBay protects
both buyer and seller.
eCheck Issues: Payments
via eCheck do not clear immediately. Usually you will wait 5-7 days
after checkout for it to clear. Then we will arrange shipments for
you.
|
|
Warranty & Feedback |
▲ 6
months' warranty for the machines, not for the consumables. We stand
behind our products all the item, so even if your warranty period has
expired, you can still seek for service or technical support from us
with low cost.
▲ Any
warranty shipping cost to us is responsible by buyer.
▲ Any
shipping cost to buyer is responsible by the seller.
▲ We
committee to the customer satisfaction and want to bring you the best
purchase experience. If there is any problems, please contact us ASAP.
If not, please leave us a positive feedback as it's very important for
us. Thanks very much. |
|
|
|