With this US Blinker module your sidelight indicators will dim at a brightness of your choice. The module will completely turn off while you are blinking, turning back on when you stop blinking, making your vehicle look like USA style
1. Find your blinker +12v and cut it;
2. Connect the yellow and yellow-black wire like in the picture above;
3. Do the same to the blue and blue-black wire, to the other blinker;
4. Connect the white wire on activation light +12v wire (LED, DRL, low beam, fog, switch, ignition);
5. Connect your red and black wire to the battery.
6. Install the module in a safe zone. Your module is ready.
• Our modules use FLRY-B cables, originally designed for vehicle eletrical circuits;
• No drilling needed;
• Works at the ambient temperature, no heat produced;
• PWM controlled module - circuit based in a microcontroller;
• This module can be used for front, side and rear blinkers;
• 10-20 minutes installation;
• No errors;
• LED & Halogen bulbs supported;
• Suitable for BMW, Audi, Volkwagen, Seat, Honda and many other 12 volt vehicle models;
• The modules are protected against moisture;
• ALL our modules are tested before shipping to ensure they're fully working;
• US Blinker with diffrent variants:
- Cut-off function: turn off while blinking;
- Dimmer: adjust the brightness of the side lights;
- ON-OFF function: ability to turn ON and OFF the module;
• US Blinker for mirror blinker
• Automatic lights module (coming soon)
• Welcome/Goodbye lights module (coming soon)
We ship worldwide using standard post and we offer FREE shipping on all orders!
Your order will be dispatched within 2 working day of receiving payment (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then we are responsible and will issue either a full refund or replacement.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging.
After the purchase of the item if you have any trouble or problem with the installation you can contact us, we will respond as soon as we can and we will be very happy to help you solving it!
With this US Blinker module your sidelight indicators will dim at a brightness of your choice. The module will completely turn off while you are blinking, turning back on when you stop blinking, making your vehicle look like USA style
1. Find your blinker +12v and cut it;
2. Connect the yellow and yellow-black wire like in the picture above;
3. Do the same to the blue and blue-black wire, to the other blinker;
4. Connect the white wire on activation light +12v wire (LED, DRL, low beam, fog, switch, ignition);
5. Connect your red and black wire to the battery.
6. Install the module in a safe zone. Your module is ready.
• Our modules use FLRY-B cables, originally designed for vehicle eletrical circuits;
• No drilling needed;
• Works at the ambient temperature, no heat produced;
• PWM controlled module - circuit based in a microcontroller;
• This module can be used for front, side and rear blinkers;
• 10-20 minutes installation;
• No errors;
• LED & Halogen bulbs supported;
• Suitable for BMW, Audi, Volkwagen, Seat, Honda and many other 12 volt vehicle models;
• The modules are protected against moisture;
• ALL our modules are tested before shipping to ensure they're fully working;
• US Blinker with diffrent variants:
- Cut-off function: turn off while blinking;
- Dimmer: adjust the brightness of the side lights;
- ON-OFF function: ability to turn ON and OFF the module;
• US Blinker for mirror blinker
• Automatic lights module (coming soon)
• Welcome/Goodbye lights module (coming soon)
We ship worldwide using standard post and we offer FREE shipping on all orders!
Your order will be dispatched within 2 working day of receiving payment (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then we are responsible and will issue either a full refund or replacement.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging.
After the purchase of the item if you have any trouble or problem with the installation you can contact us, we will respond as soon as we can and we will be very happy to help you solving it!
