Big sale for 1 Month, please Hurry UP!
The item includes:
4 PCs Nema 23 stepper motor 23HS8430 76MM body length 3A shaft 6.35mm
1.9Nm ≈ 270Oz-in
4 PCS Nema 23 stepper motor driver DM542 18-50V 1-4.2A
2PCS Power supply 350W 36V 9.7A
1 PC6 axis TB2520 breakout board PLT port
Step angle (°) | Motor Length L(mm) | Shaft Diameter L(mm) | Rate Voltage (V) | Rate Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Holding Torque (N.M) | Lead Wire (NO.) | Rotor Inertia (g.c㎡) | Detent Torque (N.cm) | Motor Weight (kg) |
Schrittwinkel | Motorlänge | Wellendurchmesser | Spannung | Nennstrom | Widerstand pro Phase | Induktanz pro Phase | Haltemoment | Anzahl der Drahtleitungen | Drehmoment | Rastmoment | Gewicht |
1.8° | 76 | Φ6.35± 0,012 D-shaft | 3 | 3.0 | 1± 10% | 3.5± 20% | 1.90Nm ≈ 270Oz-in | 4 | 480 | 6.0 | 1.2 |
Wires Connection/Leitungsverbindung
A+ | A- | B+ | B- |
BLK Schwarz | GRN Grün | RED Rot | BLU Blau |
Specification/ Spezifikation:
Eingangsspannung | Input voltage | 24~50VDC |
Eingangsspannung | Output current | 0.7~4.2A(PEAK) |
Pulsfrequenz | Pulse frequency | 0~100KHz |
Mikroschritte | MicroSteps | 16 MicroSteps |
Umgebung nutzen | Using environment | Avoid high temperatures, oil mist, dust, corrosive gases |
Mit Überstrom-, Überspannungs- und Unterspannungsschutz | With overcurrent, overvoltage undervoltage protection | -20~+65C , avoid direct sunlight |
Merkmale/Features
l The latest 32-bit digital processing technology
l Optically isolated differential signal input
l ultra low vibration noise
l Easy current setting, can be switched between 0.7~4.2AIntegrated parameter power-on auto-tuning functionSubdivision setting (400~25600)
l with overcurrent, overvoltage, undervoltage protection
3. POWER SUPPLY 350W 36V
Power supply
Model:S-350-36
DC output voltage:36V
Current range:0-9.8A
Voltage tolerance:±1%
Ripple&Noise：150mV
Efficiency：83% Size: 215*115*50mm
Weight:1.0kg
AC input range selected by switch.
Protections:short circuit/overload/over voltage/over temperature100% full load burn-in testLow cost,high reliability1 year warranty
AC input voltage range: 90～132VAC/180～264VAC
AC inrush current: cold start 25A/115V,50A/230V
DC adjustment range:±10% rated output voltage
Overload protection:105%～135%, hiccup mode, auto recovery
Setup,rise,hold up time: 200ms,50ms,20ms/230VAC at full load
Working temperature and humidity:-10℃～+60℃；20%～90 %RH
4. Breakout board TB2520
Set pins according to software as follows:
Output pin: P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
l P2 – X axis Pulse, P3 – X axis Direction
l P4 – Y axis Pulse, P5 - Y axis Direction
l P6 – Z axis Pulse, P7 – Z axis Direction
l P8 - A axis Pulse, P9 - A axis Direction
l P14 - B axis Pulse, P1- B axis Direction
l P16 - C axis Pulse, P17- C axis Direction
Input pin: P10 ,P11, P12, P13, P15
l Set them for Emergency Stop and X Y Z Limit switch
Shipping way by UPS Or DHL, 3-5 delivery to Germany local person,5-10 days to EU members.