Product Features:
Important:
-Apply cuff as illustrated in the manual and tighten firmly before starting the reading 
-Take blood pressure at the same time every day. In the morning shortly after getting up is best 
-Don't use the monitor in a very cold environment,don't use monitor when you want to discharge urine 
-Avoid eating, alcohol, smoking, exercising, medications, and bathing for 30 minutes before measuring blood pressure 
-Rest in a chair for 5 to 10 minutes before taking a reading,don't talking or moving when measuring 
-Sit in a comfortable position and rest your arm on a table at approximately heart level for the reading 
-Note that your blood pressure can vary significantly in as little as a few minutes 
-For maximum accuracy you can use the option to average your last 3 readings 
Product Specifications:
 Measuring range :Blood Pressure : 30~280 mmHg Pulse Rate : 40~199 beats/min 
Calibration Accuracy : Blood Pressure : ± 3 mmHg Pulse rate : ± 4% of reading 
Operating environment : 50 °F ~104 °F 
with relative humidity up to 85% (non condensing) 
Storage/ Transportation environment : 
with relative humidity up to 85% (non condensing) 
Power Source :2 x 1.5 V AAA batteries(not included) 
Weight :approx. 4.23oz (exclude batteries) 
Dimensions :approx. 71mm x 84mm x 32.2mm (W x H x D) 
Cuff circumference (M Size) : approx. 4.92~8.26inch (12.5~21 cm) 
Blood Pressure : 30~280 mmHg 
Pulse Rate : 40~199 beats/min 
Blood Pressure : ± 3 mmHg 
Pulse rate : ± 4% of reading 
Package Included:
    1x Blood pressure monitor wrist type 
    1x storage case 
    1x manual 
    (Batteries NOT included) 
    Suggestions for Measuring Blood Pressure
    Avoid eating, drinking, smoking, or exercising for at least 30 minutes before  taking a measurement. You should also
    try to measure your blood pressure at the same time each day.Measurement should be taken in a quiet place and you 
    should be in a relaxed, seated position.
    1. Align the wrist cuff with the level of your heart and gently support your left arm with your right hand. 
    Do not place your right hand on the cuff itself.
    2. Press the START/STOP button.
    Remain quiet, sit still and do not talk during the measurement.
    Notes:
    * Always wait at least 2-3 minutes before taking another blood pressure measurement.
    You may require more rest time between readings depending on your individual physiological characteristics.
    * Always wrap the wrist cuff around your wrist before starting to take a measurement.
    * Do not measure your blood pressure while you are in a vehicle.
    * Always measure your blood pressure on the same wrist.
    How to Apply the Wrist Cuff
    1. Roll up your sleeve so that the monitor is in direct contact with skin. Do not apply over clothing.Make sure that your
    sleeve is not too tight and does not constrict the flow of blood in your arm.
    2. Place the wrist cuff over your left wrist with your left thumb facing upward.
    3. Hold the bottom part of the wrist cuff and wrap it around the wrist while pulling so that it fits comfortably.
    Make sure that the wrist cuff does not cover the protruding part of the wrist bone (ulna) on the outside of the wrist.
    Unless the wrist cuff is wrapped securely around the wrist, it may not be possible to take correct measurements.
    4. The remaining part of the wrist cuff can be conveniently folded back out of the way
    Taking measurements on the right wrist Measurements can also be made on the right wrist.
    Fit the monitor on the right wrist.