Hydraulic top link cat. 1 - 1 with locking block 360-470mm with 2 x hose

 

Description:

The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this - an unbeatable combination in combination with the integrated locking block *.

* When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor's control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted.

 

Furnishing:

High quality and workmanship and painted

Incl. Locking block

Top link cat. 1

2x hydraulic connection

Delivery is completely assembled

 

Technical specifications:

Hydraulic connection: 3/8 "

Tractor top link with Ø19mm (3/4'') pin holes on both ends (the piston can be rotated as needed)

Ball width: 44mm  (1-3/4'') (both ends)

Cylinder bore: Ø50mm ( 2'')

Cat 1 top link rod diameter: Ø30mm  (1-3/16'')

Hydraulic pressure max. 250 bar

Thrust: 3.5 to

Pulling force: 2.3 to

Weight about 8 kg

 +

2 x hydraulic hose with plug and dust cover

Technical specifications:

Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + union

Hose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 

Operating pressure: 180 bar

Length: 75 cm