• Input: 100-240V AC
• Input AC Inlet: IEC 320 3pin (Type C14) compatible
  
• Output Voltage: 12V DC
• Ratings: 5A (60W) Continuous
  
• DC Cable length - 120cm
• DC Jack Dimensions: 5.5mm (outer) / 2.5mm (inner) / 10mm (length)
• High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load.
• Meet DOE CEC level VI
• No load Power Consumption :  Less then 0.21W
  
• Fanless AC adapter operates in total silence.
• UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Certified
• RoHS Compliant

Technical Specifications

---

• AC Input Voltage
   Maximum Voltage: 264Vac
   Normal Voltage : 100~240Vac
   Minimum Voltage: 90Vac

• AC Input Frequency
  Maximum Frequency: 63Hz
  Normal Frequency: 50~60Hz
  Minimum Frequency: 47Hz

• Input Current:
   1.2A (Max.) @ 115Vac input will full load.
   0.6A (Max.) @ 230Vac input will full load.

• High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load. Meet CEC level VI

• No load Power Consumption :  Less then 0.21W

• Inrush Current (cold start) : 30A Max. @110Vac/60Hz;   60A Max. @230Vac/50Hz

• AC Leakage Current: 0.25mA Max. @240VAC input.
  

• Line Regulation: This line regulation is less than ± 5%, of rated output voltage@ full load

• Minimum Load: 0.0A
  

• Hold Up Time: ≧ 5mSec., @ 115V AC input line, with full load.

• Rise Time: ≦40 milli-second @ 115V AC input with full load - from 10% to 90% of output voltage.

• Turn-ON Time: The output voltage should rise to 90% of rated output voltage in less than 3 second from 115V AC applied to start up.
  

• Over voltage protection
  

• Short circuit protection

• Over Voltage Protection
  

• 100% HI-POT tested: IEC 320 3pin primary to secondary 1800Vac 5mA 1min
  

• 100% cycling BURN-IN under 80% load for 2 hours
  

• 12V DC output @  +- 5% Standard Deviation

• 120mVMaximum Ripple Voltage

• Operating temperature:  0 - 50 degree C
  

• Storage temperature: -20 - 80 degree C

• Humidity : Operating -  10 to 90 %;  Storage - 5 to 90 %

• Altitude :  Operating - From sea level to 2,000-Meter ; Storage - 5,000-Meter

• MTBF : > 50,000 hours at full load under 25 degree C ambient condition

• Safety compliance: UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA

• Case dimensions: 110mm (Length)/ 45mm (Width)/ 26mm (Height)

Lead-FREE  Cadium-FREE  Mercury-FREE  Hexavalent chromium-FREE  PBB-FREE  PBDE flame retardants-FREE

RoHS Compliant - made with hazardous-free components RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium,mercury, hexavalent chromium, polybrominated biphenyl (PBB), andpolybrominated diphenyl ether (PBDE) flame retardants are limited as well.

 

---

Built-in power statusindicator Blue LED turns steady on when there is a reliable 12V DC output. LED flashes when there is a problem found by the internal detection circuitry. LED turns off when there is no power output or no power input