DIY Cap Pack Kit

This kit is designed for those who want to choose and supply their own capacitors.


PCB Specs-

Base Material: FR-4

Layers: 2

(2C Kit) Dimension: 33mm x 23.8mm

(4C Kit) Dimensions: 41mm x 33mm

(6C Kit) Dimensions: 58mm X 33mm

PCB Thickness: 1.6mm

PCB Color: Purple

Silkscreen: White

Surface Finish: HASL(with lead)

Outer Copper Weight: 1oz

Flying Probe Test: Fully Test

Material Type: FR4-Standard Tg 130-140C


Wire Specs-

Manufacture: BNTECHGO

Insulation Material: Silicone Rubber

Conductor Material: Tinned Copper

Conductor Specification: 1050/0.08TS

Conductor OD: 3.0 mm

Conductor Resistance: 3.270 Ohms/km

Conductor Cross-Section: 5.25 mm²

Insulation Thickness: 1.30 mm

Over Diameter: 5.5 mm

Supplied Length: 152mm/6inch


Heat Shrink Specs (2C)-

Material:PVC

Flat Width: 50mm/2inch

Flat Length: 75mm/2.95inch


Heat Shrink Specs (4C & 6C)-

Material:polyolefin

Flat Width: 75mm/2.95inch

Flat Length: 75mm/2.95inch

Thickness: 0.2mm (before shrinkage); 

Shrink Temperature Range: -55℃ ~ 125℃

Rated Voltage : 600V

Shrink Ratio: 50%

It is recommended to use a heat gun to shrink


Capacitor recommendation (NOT INCLUDED)

Diameter: 16mm

Length/Heigth: 25-35mm

Lead Spacing: 7.5mm

Low ESR

5,000+ Hour Life






Designed and Assembled in the United States



What does a 'Cap Pack' do?



The Problem-

Voltage Ripple occurs when the current demand is greater than the batteries' ability to supply it. When this happens, the voltage supplied to the ESC will dip and the AMPs drawn by the ESC will spike causing damage to the ESC. In addition to damaging the ESC, the battery can also be stressed and overheat causing damage. Low quality (Low C Rating) batteries or low mAh batteries can increase the voltage ripple.


Symptoms-

-Shortened life of ESC

-Overheating of ESC and battery

-Diminished ‘Punch’ when nailing the throttle


The Solution-

Capacitor Packs act as a rapidly chargeable and rapidly dischargeable secondary battery. Cap Packs instantly release stored energy when the ESC demands more power than the battery can supply. As soon as the demand is reduced below this threshold, the Cap Pack will instantly recharge ready for the next demand surge.


Installation-

Search ‘RC cap pack install’ on YouTube. There are dozens of instructional videos available. As the saying goes, a picture is worth a thousand words.