12V 5A 4-pin XLR AC to DC Power Adapter for
Sony AC-500 AC-550 BW-536
Included: NEW 3-Prong Grounded UL Safe AC Power Cord
High efficiency design 88% minimum Low standby no load power consumption meeting CEC level VI (less than 0.21W)
- Input: 100-240V AC
- Input AC Inlet: IEC 320 3pin (Type C14) compatible
- Output Voltage: 12V DC
- Ratings: 5A (60W) Continuous, 70W Peak
- DC Cable Length - 120cm
- DC Jack Type: XLR 4-Pin (compatible with JVC / SONY / PANASONIC)
- High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load.
- Meet DOE CEC level VI Efficiency Level
- No load Power Consumption : Less then 0.21W
- Fanless AC adapter operates in total silence.
- UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Certified
- RoHS Compliant
Technical Specifications:
AC Input Voltage:
Maximum Voltage: 264Vac, Normal Voltage : 100~240Vac, Minimum Voltage: 90VacAC Input Frequency:
Maximum Frequency: 63Hz, Normal Frequency: 50~60Hz, Minimum Frequency: 47Hz
Input Current:
1.2A (Max.) @ 115Vac input will full load
0.6A (Max.) @ 230Vac input will full load
- DC Output Power: 5A (60W) Continuous, 70W Peak
- High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load. Meet CEC level VI
- No load Power Consumption : Less then 0.21W
- Inrush Current (cold start) : 30A Max. @110Vac/60Hz; 60A Max. @230Vac/50Hz
- AC Leakage Current: 0.25mA Max. @240VAC input.
- Line Regulation: This line regulation is less than ± 5%, of rated output voltage@ full load
- Minimum Load: 0.0A
- Hold Up Time: ≧ 5mSec., @ 115V AC input line, with full load.
- Rise Time: ≦40 milli-second @ 115V AC input with full load - from 10% to 90% of output voltage.
- Turn on Delay Time: The output voltage should rise to 90% of rated output voltage in less than 3 second from 115V AC applied to start up.
- Over voltage protection
- Short circuit protection
- Over Voltage Protection
- 100% HI-POT tested: IEC 320 3pin primary to secondary 1800Vac 5mA 1min
- 100% cycling BURN-IN under 80% load for 2 hours
- 12V DC output @ +- 5% Standard Deviation
- 120mV Maximum Ripple Voltage
- Operating temperature: 0 - 50 degree C
- Storage temperature: -20 - 80 degree C
- Humidity : Operating - 10 to 90 %; Storage - 5 to 90 %
- Altitude : Operating - From sea level to 2,000-Meter ; Storage - 5,000-Meter
- MTBF : > 50,000 hours at full load under 25 degree C ambient condition
Standard US 3-pong AC Inlet
- IEC 320 3pin (Type C14) compatible
- Standard US computer 3-prong AC power cord compatible
- Ground pin included for extra safety over 2-prong design
Built-in power status indicator
- Blue LED turns steady on when there is a reliable 12V DC output.
- LED flashes when there is a problem found by the internal detection circuitry.
- LED turns off when there is no power output or no power input.
DC cable: 20AWG, 1200mm total length
Safety compliance: UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA
Dimensions: 110 (L) * 45 (W) * 26 (H) mmRoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE