MPPT 80A 100A 12V 24V solar charge controller for maximum 100V solar panel input with two USB 5V output solar controller
MPPT K100A:
12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:1300W
24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W
MPPT K80A:
12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:1000W
24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2000W
Overview:
MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%.
This series MPPT have such advantages:
-
All the Various Real-time data show on one display ,Convenient user to check
-
The Solar Panel input voltage up to 100V, suitable for various specifications of solar panel
-
The power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss
-
Dual USB 5V Output for phone charging
-
Support Remote Display
Feature:
-
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
-
High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
-
Ultra-fast tracking speed and guaranteed tracking efficiency.
-
Wide MPP operating voltage range.
-
12/24VDC automatically identifying system voltage.
-
LCD panel display design, dynamically displaying tool‟s operating data and working condition.
-
Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
-
Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries.
-
Battery temperature compensation function.
-
Multiple load work modes
-
This solar charge controller with three time function.
-
A: time (night working) B: period (pause) C: time slot (dawn working)
Package Including:
1PCS MPPT Solar Controllers
1PCS User Manual (English)
1PCS Temperature Sensor
Function:
"K" series of an intelligent, multi-purpose solar charge controller
| LCD screen display |
Battery reverse discharge protection |
| Simple (and more time control) operation |
Battery reverse polarity protection |
| MPPT charging mode |
Battery under voltage protection |
| Parameter user can reset |
Overload, short-circuit protection |
| A key to open and close the load |
Automatic temperature compensation function |
| A key to restore the factory settings |
USB5V charge 2.4A |
LCD Operating interface description :
Network Line Interface (RS485) Indicator: Green light represents the battery, green light flashes, indicating that the load is working properly; yellow light indicates solar energy; yellow light flashes, indicating solar energy charging;
Parameter Table:
| Model | MPPT K80 | MPPT K100 |
| Maximum power current | 80A | 100A |
| Battery Votlage | 12V 24V Auto | |
| Battery float voltage | 13.8V(12V system)/27.6V(24V system) | |
| Battery (under voltage) protection | 10.6V(12V system)/21.2V(24V system) | |
| Battery (under voltage) recovery voltage | 12.6V(12V system)/25.2V(24V system) | |
| Solar Panel Maximum open circuit voltage(Voc) | ≤48V（Voc）12V system ; ≤96V（Voc）24V system |
|
| Maximum open circuit voltage of the solar panel (Voc) | 18V-48V(12V system) / 36V-96V(24V system) | |
| Maximum PV input power | 1000W(12V system) 2000W(24V system) |
13000W(12V system) 2600W(24V system) |
| System load loss | ≤13mA |
|
| Loop Buck | ≤100mV |
|
| Operating Temperature | -10°C~60°C |
|
| Storeage Temperature | -30°C~70°C |
|
| Humidity requirements | ≤90%, No condensation |
|
| Temperature compensation | -4mV/Cell/°C |
|
| Installaton Lin(mm2) | 8mm2 |
10mm2 |
| Installaton Line(AWG) | 10(AWG) |
10(AWG) |
| Batery capacity configuration | ≥300AH
|
|