Technics SL-1200G-S Direct Drive Turntable System Technics Record LP AC100V

Thank you for your interest !!

●Condition: Brand New 

●Power supply: AC 100V 50/60 Hz

●Power consumption: 12 W (power on) 0.2 W (power off)

●Dimensions (approx.): W17.8 x H6.8 x D14.6 (in) / W453 x H173 x D372 (mm)

●Weight(approx.): 39.6lb / 18.0 kg

●Type: Direct-drive turntable system (manual)

●Drive System: Direct Drive

●Drive Motor: Brushless DC motor

●Turntable: Aluminum die-cast, brass integrated, diameter: 332 mm, weight: approx. 3.6 kg (including rubber sheet)

●Rotation speed: 33 1/3, 45, 78 r/min

●Rotation speed adjustment range: ±8 %, ±16

●Starting torque: 3.3 kg-cm

●Starting Characteristic：0.7 s (at 33 1/3 r/min)

●Brake Mechanism: Electronic brake

●Wah flutter：0.025 % W.R.M.S. (JIS C5521)

●SN ratio (rumble): 78 dB (IEC 98A weighted)

●Type: Universal S-shape tone arm, statically balanced

●Arm effective length: 230 mm

●Overhang: 15 mm

●Tracking error angle: +2° 32′ (outer circumference of 30cm record), +0° 32′ (inner circumference of 30cm record)

●Offset angle: 22° (+0° 32′)

●Arm height adjustment range: 0 to 6 mm

●Needle pressure adjustment range: 0 to 4 g (needle pressure direct reading type)

●Shell weight(approx.): 0.2oz / 7.6 g

●Applicable cartridge weight: Without auxiliary weight: 5.6 to 12.0 g, 14.3 to 20.7 g (including head shell), with small auxiliary weight: 10.0 to 16.4 g, 18.7 to 25.1 g (including head shell), with large auxiliary weight: 14.3 to 19.8 g, 23.0 to 28.5 g (including head shell) (including head shell)

●Cartridge mounting dimensions: JIS standard 12.7 mm (1/2") mounting distance

●Shell terminal lugs: 1.2 mmφ 4-pin terminal lugs

※ Please note 

Check the voltage of your country.

The voltage for this item is 100V. If you use this item in countries where the voltage is more than 100V such as 200V - 240V, the item will be broken unless you use a proper transformer. Please purchase at your local electronics store.