Big sale for 1 Month, please Hurry UP!
The item includes:
3PC Nema 34 stepper motor 34HS5435B 151MM body length 3.5A Dual flat shaft 14mm
12Nm ≈1700Oz-in
3 PC Nema 34 Stepper motor driver DQ860MA 2.8A-7.8A 24-80DC
3PC Power supply 350W 60V
1pc breakout board with PLT port for free
1.Electrical
Specifications :34HS5435B
Step angle (°) |
Motor Length L(mm) |
Shaft Diameter L(mm) |
Rate Voltage (V) |
Rate Current (A) |
Phase Resistance (Ω) |
Phase Inductance (mH) |
Holding Torque (N.M) |
Lead Wire (NO.) |
Rotor Inertia (g.c㎡) |
Detent Torque (N.cm) |
Motor Weight (kg) |
Schrittwinkel |
Motorlänge |
Wellendurchmesser |
Spannung |
Nennstrom |
Widerstand pro Phase |
Induktanz pro Phase |
Haltemoment |
Anzahl der Drahtleitungen |
Drehmoment |
Rastmoment |
Gewicht |
1.8° |
151 |
Φ14 Dual shaft |
5.6 |
3.5 |
1.6± 10% |
22± 20% |
12Nm ≈ 1700Oz-in |
4 |
3600 |
24.5 |
4 |
Wires Connection/Leitungsverbindung
A+ |
A- |
B+ |
B- |
RED Rot |
GRN Grün |
YE Gelb |
BLU Blau |
2.DM860
Specification/ Spezifikation:
Input Voltage/ Eingangsspannung | 24-80V DC, 60 V (typisch) |
Microstep Setting/ Unterteilungsbereich | 400-51200 ppr |
Output Current/ Ausgangsstrom | 2.8A-7.8A |
Input Pulse Frequency/ Impulsantwort Frequenz | 200 kHz (.) |
Insulation Resistance / Isolationswiderstand | ≥500MΩ |
Storage Environment | -40 ℃ - +70 ℃ |
Humidity | Not condensation, no water droplets |
Weight | 500g |
Using Environment | -10 ℃– 45 ℃, avoid dust and corrosive gas |
Characters/ Eigenschaften:
· Average current control, 2-phase sinusoidal output current drive
· 8 channels output phase current setting
· Offline command input terminal
· High start speed
· High holding torque under high speed
· High performance, low price
· Opto-isolated signal I/O
· Overvoltage, under voltage, overcorrect, phase short circuit protection
· 14 channels subdivision and automatic idle-current reduction
· Motor torque is related with speed, but not related with step/revolution
3. 350w 60v
Power supply:
Model:S-350-60
DC output voltage:60V
Current range:0-5.8A
Voltage tolerance:±1%
Ripple&Noise:150mV
Efficiency:83%Size: 215*115*50mm
Weight:1.0kg
AC input voltage range: 90~132VAC/180~264VAC
AC inrush current: cold start 25A/115V,50A/230V
DC adjustment range:±10% rated output voltage
Overload protection:105%~135%, hiccup mode, auto recovery
Setup,rise,hold up time: 200ms,50ms,20ms/230VAC at full load
Working temperature and humidity:-10℃~+60℃;20%~90 %RH
4. Breakout board
Set pins according to software as follows:
Output pin: P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
l P2 – X axis Pulse, P3 – X axis Direction
l P4 – Y axis Pulse, P5 - Y axis Direction
l P6 – Z axis Pulse, P7 – Z axis Direction
l P8 - A axis Pulse, P9 - A axis Direction
l P14 - B axis Pulse, P1- B axis Direction
l P16 - C axis Pulse, P17- C axis Direction
Input pin: P10 ,P11, P12, P13, P15
l Set them for Emergency Stop and X Y Z Limit switch
Shipping way by UPS Or DHL, 3-5 delivery to Germany local person,5-10 days to EU members.