Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

VIDEO OF ATOM P60:

What's in the Box:

• Amplifier
• Birth sheet with Dyno-tested power
• Mounting Screw Kit
• Owner's manual
• Warranty

Description:

The all new ATOM full range class "D" series of amplifiers produce a ton of power while delivering pristine sound quality. We also include a volt meter on this series.

The ATOM P60 is a class D 2-Channel high power amplifier with 4800 watts peak output and 1200 watts true RMS power. The RMS power is tested on a dyno using the certified run. It puts out 600 watts x 2 channels at less than 1% THD at 14.4 volts. We give the true power and the peak rating so you can easily compare this amp to any brand on the market regardless of how they like to rate their products.

This amp utilizes high grade marine components including a conformal coated PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink casing, including the bottom plate, is made of stainless steel which is rustproof. The end panels, the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

Features:

• Rockville ATOM P60 4,800 Watt Peak and 1200 Watt RMS Class D 2 Ohm Car Stereo Amplifier Dyno certified RMS Power (less than 1 % distortion) (Use these ratings when comparing with other premium brands such as Kicker, Rockford Fosgate, etc)
• 2 Ohm: 600 Watts x 2 Channel <1% THD+N @ 14.4 Volts
• 4 Ohm: 360 Watts x 2 Channel <1% THD+N @ 14.4 Volts
• 4 Ohm Bridged: 1200 Watts x 1 Channel <1% THD+N @ 14.4 Volts
• Peak Power: (Use these ratings when comparing with great budget brands such as Boss, Power Acoustik, Crunch, etc)
• 2 Ohm: 2400 Watts x 2 Channel
• 4 Ohm: 1440 Watts x 2 Channel
• 4 Ohm Bridged: 4800 Watts x 1 Channel
• Digital Voltage Display on Amp
• Adjustable Low Pass Filter: 50Hz - 250Hz
• Adjustable High Pass Filter: 50Hz - 250Hz
• Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
• Rustproof Aluminum heat sink with black hairline finish
• Stainless steel end panels are rustproof
• All screws and mounting hardware are stainless steel and rustproof
• Bottom panel is aluminum and rustproof
• 4 Gauge power and ground terminals
• 10 Guage speaker wire temrinals
• All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
• All channels on the amplifier are bridgeable
• High-Speed MOSFET Power Supply
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• Tertiary Supplies Circuitry
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Full IC-Controlled Protection Circuitry
• Fully Adjustable 12dB Bass Equalizer
• Adjustable Input Level Control
• Mute and Delay Soft Start System
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: >90dB
• Frequency Response: 10Hz - 30KHz
• Damping Factor: >85 @ 100Hz
• 40 Amp x 3 ATC Fuse
• Dimensions: (Lx W x H) 12.4" x 6.7" x 2.0"

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.