Solar Grid Tie Inverter 600w Mppt Adjustable Battery Durable Discharge Power
Item Description
600W MPPT
Pure Sine Wave Grid Solar Grid Tie Inverter Adjustable Battery Discharge Power
24V 36V 48V 72V to AC 110V or 220V
The latest produced item would be with new improved
potentiometer and there would be no Aluminum fin heat sink for new
produced 600W but with two fans.
Specifications
Rated Power | 600W |
Input(DC) |
PV open voltage range |
| 26V-45V | 39V-60V | 55V-90V | 85V-130V | 120-180V |
PV MAX input power(W) | 7000W |
MPPT Voltage range(V) |
| 22-34VDC | 33-47VDC | 44V-70VDC | 66-100VDC | 90-140V |
MPP tracking efficiency | >99% |
MAX.DC current(A) |
| 30A | 20A | 15A | 10A | 10A |
Suitable for Battery voltage(V) |
| 24V | 36V | 48V | 72V | 96V |
Battery Low Voltage Protection(V) |
| 22V | 33V | 44V | 66V | 88V |
Output(AC) |
PV mode AC MAX output (W) | 500 |
Battery mode Max output power |
| 450W | 450W | 450W | 450W | 450W |
AC output range | 220VAC(190-260VAC) or 120VAC(90-135VAC) |
Frequency range | 50Hz(48~52) or 60Hz(58~62) |
Power Factor | >98% |
THD | <5% |
Phase Shift | <1% |
Stable real efficiency / 120V |
| 87% | 88% | 89% | 89% | 91% |
Stable real efficiency / 220V |
| 88% | 89% | 91% | 92% | 94% |
Other electrical data |
Protection | Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection |
Work Temperature | ‘-25°C~ 80°C |
Work Humidity | 0%~90%RH non-condensing |
Grade of Waterproof | Outdoor design IP22 |
LED Show | R&G&B LED |
Cooling | Fan |
Stand-by Power | <1W |
Matching component: | Monocrystalline ,polycrystalline , thin-film solar panels. |
Mechanical data |
Net Weigtht | 2.2kgs/pc |
Gross Weight | 2.5kgs/pc |
Machine size(LxWxH) | 22.2x16.2x6.5CM |
Packing Size (LxWxH) | 32x22x12CM |
PV grid-connected inverter operating mode
The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Conversation process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.
Startup - When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.
Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under different daylight and temperature conditions.
Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.
Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.
When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.
(Battery) discharge and grid mode(With ADJ function models)
1.The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 80W-450W or so arbitrary output to ensure that the inverter can work for a long time in the grid status.
2. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life.
3.Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following
Battery voltage | Inverter Input | Battery Low voltage protection | Battery high voltage protection |
12V battery | 16V~28V | 11V | 14.5V |
24V battery | 26V~45V | 21V | 29V |
36V battery | 40V~62V | 33V | 43.5V |
48V battery | 55V~90V | 44V | 58V |
60V battery | 48V~86V | 55V | 72.5V |
72V battery | 85V~130V | 66V | 87V |
96V battery | 120V-180V | 88V | 120V |
Payment
Please ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled.
Shipping
Once we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return
We offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.