Operation Instruction :
1. To achieve optimum priming and long service life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use
2. Be sure inlet hose is airtight and as short as possible, inlet hose should not exceed 2.75m
3. When pumping abrasive fluids or liquids with solids, using a strainer on the inlet line for longer service time
4. It is recommended that the pump is mounted to a surface for security and ease of use
5. Mount and start drill, observe whether the inlet pipe has a certain fluid that is sucked into the pump within 15-20 seconds. If not, check that inlet tube is properly mounted to inlet pump. Do not run dry, if pump fails to prime, check if the hose is kinked or clogged
6.It is recommended that the electric drill rotate at 1500-3500 rpm and do not run the pump in reverse.
Specifications:
Color: black
Size: about 106*37*64mm
Material: plastic
Working temperature: about 5-49℃(41-120℉)
Package Include:
1 x Drill Pump
2 x Hose Clamps
2 x Connectors(Other Accessories are not included).
Note:
1. Due to computers display colors differently,the color may vary slightly from the above images,Thanks for your understanding!
2. Manual measured, please allow 1-5mm error