Description:
The wind solar hybrid charge controller is the strongest current focus tracking MPPT charging and boosted MPPT charging.
The first group of batteries is to track the current and focus on the highest power point of the MPPT to adjust the internal charging method to maximize the conversion of light energy into electrical energy. The second set of batteries is MPPT charging with low-voltage boost and high-voltage constant voltage tracking. Please recognize the technical characteristics when purchasing, so as to avoid misunderstanding.
PRODUCT FEATURES:
1. Industrial-grade main control chip, 16-level AD sampling accuracy, accurate real-time display of temperature, charging current, and discharging current, and the cumulative power generation is clear at a glance
2. Auto-focus MPPT tracking charging, high charging efficiency, non-stop detection during the charging process two-way focus tracking. Input 15V to 40V boost MPPT for efficient charging.
3. Large-screen LCD display, adjustable charging and discharging parameters UItra-wide charge and discharge can be adjusted. As long as you understand the characteristics of the battery and set its corresponding charging parameters, you can charge any battery. The output power off minute and hour can be adjusted, which is more convenient (the market only has no minute adjustment)
4. Complete 3-stage charge management, effectively protect the battery, and the battery is more durable.This controller is suitable for all kinds of lead-acid batteries (including open, sealed, and colloida. Lithium batteries require user-defined parameters).
5.To charge the 12V/24V/36V/48V/60V battery, the voltage value of the solar panel is 1.5 times the voltage value of the battery to be recharged.
6. Built-in overheating, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller will automatically recover without damaging the equipment. It is strictly forbidden to short-circuit the boost output power port!
7. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat generation.
8. Both charging and discharging are combined with multiple MOS, high-power charging and discharging, and the Phoenix wing aluminum alloy has good heat dissipation performance
9.No battery is needed to supply power to the load, it is a real sunshine application.
Notice:
Regarding wind and solar input power, strictly follow the recommendations below.
1.The maximum wind input is 200W.
2.Maximum input power of solar panel:
30A=300W
40A=400W
60A=600W
100A=700W
SYSTEM CONNECTION:
1. Connect the positive electrode of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage.
2. Connect the positive and negative poles of the load to the controller as shown in the figure, and be careful not to reverse them.
3. Connect the solar panel to the controller as shown in the figure.
4. Connect the wind generator to the controller as shown in the figure.
5. Rise Charging function, Or for power output,short circuit is strictly prohibited at any time!
Charging connection mode:
Wind input 15V-50V, solar panel 18~90V input, charge the battery ①12V, 24V, 36V, 48V, 60V, the output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the voltage value corresponding to the rechargeable battery, set the relevant charging parameters, with memory function.
Dual battery charging connection mode:
Wind input 15V-50V, solar panel 18V input, charge ① battery 12V, ② battery 24V, 36V, 48V, 60V battery; solar panel 36 volt input ① battery 24V ② battery 36V, 48V, 60V battery charge. The output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the corresponding voltage value of the rechargeable battery ①battery, ②battery, set the relevant charging parameters, with memory function.
Boost charging connection mode:
Wind input 15V-50V, solar panel 18V input, ①not connected to the battery, connected to the negative pole ②Battery 24V, 36V, 48V, 60V battery charging; solar panel 18V--36V input ①not connected to the battery, connected to the negative pole ②Battery 24V ( PV18V), 36V, 48V, 60V (PV36V) battery charging. The output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the voltage value corresponding to the charging ② battery, set the relevant charging parameters, with memory function.
No battery working mode:
Wind input 15V-50V, solar panel 18V input, ①Do not connect the battery., connect to the negative pole ②Load 24V, 36V, 48V, 60V drive work. The boost output voltage value is consistent with the load voltage value, and the load is finally connected. Connect the wind or hydraulic motor or solar panel with 18 volt solar panel, first set the voltage value corresponding to the load, set the relevant charging parameters, with memory function.
Model
|
TY-WSC-30
|
TY-WSC-40
|
TY-WSC-50
|
TY-WSC-60
|
TY-WSC-100
|
Rated Charge Current
|
30A
|
40A
|
50A
|
60A
|
100A
|
Rated Discharge Current
|
10A
|
10A
|
20A
|
20A
|
30A
|
Equalization 12V/24V
|
B01 Lithium
|
B02 Gel
|
B03 Flood
|
||
12.2V/24.4V
|
14.2V/28.4V
|
14.6V/29.2V
|
|||
Max Solar Input
|
18V Solar Panel for 12V battery, 36V solar Panle for 24V <40V
|
||||
Equalization36V/48V
|
B01 Lithium
|
B02 Gel
|
B03 Flood
|
||
37V/49V
|
42V/56V
|
44V/58V
|
|||
Max Solar Input
|
54V Solar Panel for 36V battery and 72V Solar Panle for 48V <80V
|
||||
Equalization 60V
|
B01 Lithium
|
B02 Gel
|
B03 Flood
|
||
61V
|
71V
|
73V
|
|||
Max Solar Input
|
60V battery is charged with 90V solar panel, voltage is less than 100V
|
||||
12V Float
|
14.2V (defaul, adjustable) 12.0---15.0
|
||||
12V Discharge Stop
|
10.7V (defaul, adjustable) 9.0---11.5V
|
||||
12V Discharge Reconnect
|
12.5V (defaul, adjustable) 11.0---13.0V
|
||||
24V Float
|
28.4V (defaul, adjustable) 24.0---29.0V
|
||||
24V Discharge Stop
|
19.0V (defaul, adjustable) 18.0---22.0V
|
||||
24V Discharge Reconnect
|
22.0V (defaul, adjustable) 22.0---26.0V
|
||||
36V Float
|
42.0V (defaul, adjustable) 36.0---45.0V
|
||||
36V Discharge Stop
|
30.0V (defaul, adjustable) 27.0---33.0V
|
||||
36V Discharge Reconnect
|
38.0V (defaul, adjustable) 36.0---42.0V
|
||||
48V Float
|
56.0V (defaul, adjustable) 48.0---60.0V
|
||||
48V Discharge Stop
|
40.0V (defaul, adjustable) 36.0---44.0V
|
||||
48V Discharge Reconnect
|
50.0V (defaul, adjustable) 48.0---56.0V
|
||||
60V Float
|
71.0V (defaul, adjustable) 60.0---75.0V
|
||||
60V Discharge Stop
|
50.0V (defaul, adjustable) 45.0---55.0V
|
||||
60V Discharge Reconnect
|
63.0V (defaul, adjustable) 60.0---70.0V
|
||||
Self-Consume
|
<10mA
|
||||
USB Output
|
5V/2A Max
|
||||
Operating Temperature
|
-10-+60℃
|
||||
Siez/Weight
|
268*138*66mm/650g
|
Product Name
|
Tengyu New Wind Solar Hybrid Charge Controller Dual USB Charge Wind-Solar hybrid system controller MPPT charge regulator
|
Material
|
AL
|
Function
|
MPPT Solar Charge Controller for Lithium and Lead Acid Battery solar regulator
|
Package
|
Neutral package
|