This is for a heat transfer only. You must own a heat press.

We also print custom orders, please look for our listing or contact us for a quote! 

Here are a few instructions to help you with pressing your DTF from ROTD.  Heat press temperature should be set to 305-325 F.

We ship your prints in a ziplock bag, with a silica pack to absorb moisture.  Please keep in mind these prints need to be kept dry.  

Prior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. 

After the transfer is warmed up, it is ready for step 2.

Use Medium to heavy Pressure to press the moisture out of your shirt and then, press the transfer on the shirt for 15 seconds, wait for 10 seconds and peel cool.

If printing small print or small text, Press for 20 seconds using heavy pressure and let the transfer cool a bit before peeling. If for any reason that the print begins to lift off the shirt, Don?t freak out, STOP PEELING AND PRESS IT AGAIN. 

If you have any questions, please feel free to reach out.

RUSH SERVICE AVAILABLE FOR $15 CHARGE, ONLY APPLIES ONCE TO ENTIRE ORDER!  This applies to ORDER PROCESSING ONLY, not shipping upgrade.

ALL ORDERS ARE SHIPPED THROUGH UPS OR USPS PRIORITY MAIL WITH TRACKING IN PLASTIC BAG INSIDE CARDBOARD STYLE BOX AND NORMALLY HAS DELIVERY DATE BETWEEN 3-4 DAYS.