4mm Shank 2mm x 10mm Titanium Coated Solid Carbide 2 Flutes Square End MillUSD 11.47
16mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End MillUSD 14.4
15mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End MillUSD 19.89
18mm Dia MT2 Morse Taper Shank C1 Carbide Tip 3 Flutes Square Nose End MillUSD 15.8
12mm Dia MT2 Morse Taper Shank C1 Carbide Tip 3 Flutes Square Nose End MillUSD 14.63
3mm x 6mm 6.08 Degree Angle TiSiN Coated Carbide Tapered Ball Nose End MillUSD 19.82
12mm Dia 12mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill 2pcs
Specifications:
- Cutting Diameter: 12mm / 0.47"
- Cutting Flute Length: 15mm / 0.59"
- Overall Length: 80mm / 3.15"
- Straight Shank Diameter: 12mm / 0.47
- Tip Material: Tungsten Carbide
- Shank Material: High Speed Steel (HSS)
- Number of Flutes: 3 Flutes
- End Cut Type: Square End
- Package Content: 2pcs x Square Nose End Mill
- Tungsten carbide tip has high hardness, high strength, wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing. Use on CNC machining centers, milling machines, drilling machine, lathes and other high-speed CNC machine tools.
- Features square end cut, 3-flute design. Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- Tips: Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
Hot Item
3mm x 25mm x 4mm x 75mm AlTiSin Coated Solid Carbide 4 Flute Square End MillUSD 14.43
1.5mm Dia 4mm Shank HRC45 Carbide AlTiN Coated 2 Flute Square Nose End Mill 2pcsUSD 11.47
1/8" Shank 1.6mm x 8.5mm Titanium Coated Carbide Left Hand End Mill Bits 4pcsUSD 11.83
10mm Dia 10mm Straight Shank Carbide Tip 3 Flutes Square Nose End MillUSD 8.43
1/8" Shank 0.7mm x 5.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcsUSD 20.42
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
12mm Dia 12mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill 2pcs
Specifications:
- Cutting Diameter: 12mm / 0.47"
- Cutting Flute Length: 15mm / 0.59"
- Overall Length: 80mm / 3.15"
- Straight Shank Diameter: 12mm / 0.47
- Tip Material: Tungsten Carbide
- Shank Material: High Speed Steel (HSS)
- Number of Flutes: 3 Flutes
- End Cut Type: Square End
- Package Content: 2pcs x Square Nose End Mill
- Tungsten carbide tip has high hardness, high strength, wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing. Use on CNC machining centers, milling machines, drilling machine, lathes and other high-speed CNC machine tools.
- Features square end cut, 3-flute design. Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- Tips: Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- 4mm Shank 2mm x 10mm Titanium Coated Solid Carbide 2 Flutes Square End MillUSD 11.47
- 16mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End MillUSD 14.4
- 15mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End MillUSD 19.89
- 18mm Dia MT2 Morse Taper Shank C1 Carbide Tip 3 Flutes Square Nose End MillUSD 15.8
- 12mm Dia MT2 Morse Taper Shank C1 Carbide Tip 3 Flutes Square Nose End MillUSD 14.63
- 3mm x 6mm 6.08 Degree Angle TiSiN Coated Carbide Tapered Ball Nose End MillUSD 19.82
Hot Item
- 3mm x 25mm x 4mm x 75mm AlTiSin Coated Solid Carbide 4 Flute Square End MillUSD 14.43
- 1.5mm Dia 4mm Shank HRC45 Carbide AlTiN Coated 2 Flute Square Nose End Mill 2pcsUSD 11.47
- 1/8" Shank 1.6mm x 8.5mm Titanium Coated Carbide Left Hand End Mill Bits 4pcsUSD 11.83
- 10mm Dia 10mm Straight Shank Carbide Tip 3 Flutes Square Nose End MillUSD 8.43
- 1/8" Shank 0.7mm x 5.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcsUSD 20.42
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.