STONETECH Revitalizer Cleaner & Protector is an all-in-one formula that cleans everyday messes while reinforcing protection.
 
Uses (Interior and Exterior)  Countertops  Backsplashes  Floors  Walls
 
Advantages  Cleaner and Protector  Built-in sealer reinforces protection  Gentle formula, neutral pH  Makes surfaces easier to clean  Citrus or Cucumber Scents  Ready-to-use or Concentrate formulas
 
Recommended Surfaces Natural stone such as:   Marble  Granite  Limestone  Travertine  Slate  Sandstone
 Flagstone  Quartzite 

 
Shelf Life  Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >50°F (10°C) and <90°F (32°C).  
 
VOC Content Subject to Consumer Product VOC Regulations <0.90% (Revitalizer RTU)
 
Cautions

Consult SDS for more safety information.  Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.
 Data Sheets are subject to change without notice. For latest revision, visit www.laticrete.com.                             DS-212.0-0516


Conduct a test area on polished marble to determine suitability and acceptability.   Skin contact: Wash skin with soap and water. Get medical attention if symptoms occur.  Eye contact: Flush eyes thoroughly with water for at least 15 minutes. Get medical attention if symptoms persist.  Ingestion: Rinse mouth. Do not induce vomiting. Get medical attention if any discomfort continues.
 
Storage and Handling Instructions  MAY BE HARMFUL IF SWALLOWED. MAY CAUSE EYE, SKIN AND RESPIRATORY IRRITATION. Do not ingest. Avoid contact with eyes and skin. Avoid prolonged exposure to vapors. Use in a well-ventilated area. KEEP OUT OF THE REACH OF CHILDREN. Do not store above 100 °F (38 °C). Do not mix with other chemicals.  Do not release to natural waterways. 
 
TECHNICAL DATA Physical Properties
 
Form Liquid Color Clear Odor Sweet pH 5.5 - 6.5 
 
INSTALLATION Surface Preparation for STONETECH® Revitalizer® Cleaner & Protector - Concentrate Read entire label before using. Use only as directed. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Keep children and pets out of the area during application and drying.  
 
 
Directions 

1. Spray or pour directly on soiled area. 

2. Wipe clean with a dry towel, lint-free cloth or sponge. No need to rinse.

3. Repeat for heavily soiled areas using a nonabrasive scrubbing pad. 

4. Wipe clean with a dry towel. 
 

MAINTENANCE Highly alkaline, acidic, ammoniated, or abrasive cleaners are not necessary for daily maintenance and may also degrade the Sealer, adversely affecting stain resistance.  Tile and stone routine cleaning with a neutral pH cleaner such as STONETECH® Stone & Tile Cleaner is recommended. For tough or difficult to remove soil use STONETECH KlenzAll™ Cleaner, a nylon scrubbing pad or a long handled stiff bristle brush. Please note: Prior to using any cleaning material on a tile, stone, etc. installation, test a discrete area or scrap piece of tile to insure desired results. For additional information, please refer to the TDS 262 Stone and Tile Care Guide.