Mini Units require 2.25 lbs of powder or 1/4 of the normal 9# part C powder.
***Parts A and B only. Part C sold separately.***
PRODUCT DESCRIPTION
SPECTRALOCK PRO Premium Grout† is a patented, high performance epoxy grout which offers excellent color uniformity, durability, stain protection, and beautiful, full grout joints in an easy to-use, non-sag formula.
Uses
Ceramic tile, glass tile and stone Residential and commercial Interior and exterior Floors and walls Ideal for re-grouting applications Swimming pools, fountains and other wet area applications
Advantages
Stainproof*
Improved non-sag formula for walls and floors
Uniform color—no blotchiness or shading
Never needs sealing
Easy to maintain, cleanable to the original color
Meets performance requirements of ANSI A118.3, ISO 13007-3 RG and EN 13888 RG
80 minutes working time at 70°F (21°C)
Equipped with anti-microbial technology
Ideal for installations at wide temperature ranges
Tough, durable, and crack resistant
Improved outperforms cement based grout
High fashion with Dazzle component
Can be used for grout joints from 1/16-1/2”
* Stain proof (residential installations only) to common household cleaners, liquids and other goods. Clean all spills immediately
Approximate Coverage Refer to Coverage Chart located on Data Sheet 254.3 APD. Approximate coverage for SPECTRALOCK PRO Premium Grout† is the same as SPECTRALOCK PRO Grout†. Actual coverage will vary depending on job site conditions, actual tile size and installed grout joint size. Add 10% for waste, spillage and clean-up, and another 10%–15% when grouting unglazed quarry tile. Expanded coverage tables at www.laticrete.com/coverage.
Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for the time listed below if stored at temperatures greater than 32°F (0°C) and less than 95°F (35°C). Part A & B Liquids – two (2) years Part C Powder – no limit** ** High humidity will reduce the shelf life of bagged product.
Limitations
Not for use in areas subjected to harsh chemicals, or areas exposed to aggressive cleaning regimens (e.g. steam cleaning). Not for use on floor and base areas in veterinary clinics, kennels, or in applications exposed to high concentrations of food and mineral acids or areas exposed to high temperatures. For these areas LATICRETE recommends using grout that meets ANSI A118.5 such as SPECTRALOCK 2000 IG. Epoxy grout for ceramic tile and stone is not a replacement for a waterproofing membrane. When a waterproofing membrane is required, use a LATICRETE® Waterproofing Membrane (see Section 10 FILING SYSTEMS). SPECTRALOCK PRO Premium Grout† should not be used on floors and base in the food preparation or cleaning area of commercial and industrial kitchen applications.
Stainproof to common household cleaners, liquids and other goods. Clean all spills immediately. Stainproof in residential installations only.
Cautions
Do not mix SPECTRALOCK® PRO Premium Grout† Part A or Part B liquids with SPECTRALOCK PRO Grout† Part A or Part B liquids.
Do not install SPECTRALOCK PRO Premium Grout† adjacent to SPECTRALOCK PRO Grout† of the same color to avoid possible color shade and texture variation.
DO NOT add water or any other material to the mixture, or re-temper with water. This will have an adverse effect on the product and void all warranties. Protect finished work from traffic until fully cured.
SPECTRALOCK PRO Premium Grout† liquid components might irritate eyes and skin. Avoid contact with eyes and/or prolonged contact with skin.
Wear protective gear (gloves, long sleeve shirt, and safety glasses) when applying. Flush thoroughly with water in case of initial contact.
DO NOT ingest internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator or dust mask. See SDS for more information.
Because propane gas heaters will cause epoxy grouts to yellow, refrain from using such heaters or properly vent all exhaust.
Keep out of reach of children.
Protect from freezing.
Light colors may darken and dark colors may fade slightly from direct UV exposure in exterior applications. Consult with LATICRETE Technical Services for specific exterior recommendations.
SPECTRALOCK DAZZLE™ (Glow) not for use in submerged installations.
Maximum stain protection is achieved in seven days at 70°F (21°C). Protect from exposure to acids (such as mustard, salad dressing, etc.) and strong cleaners during this period. Protect grout from dirt, construction debris, and contamination for 7 days @ 70°F (21°C).
SPECTRALOCK PRO Premium Grout† is a sanded grout. Use of sanded grouts in joints <1/8" (3 mm) will result in a coarser surface compared to surfaces in wider joints.
SPECTRALOCK DAZZLE (Glow) might discolor from strong alkali cleaners and acids. Use a neutral pH solution of soap and water when cleaning SPECTRALOCK PRO Premium Grout† mixed with SPECTRALOCK DAZZLE (Glow).
Some soft polished marble or delicate glazed or glass tile might be scratched by SPECTRALOCK PRO Premium Grout† during installation. Apply a small test area to determine results before grouting entire installation.
In steam rooms or submerged applications, allow SPECTRALOCK PRO Premium Grout† to cure for 10 days at 70°F (21°C) days before use of area and filing with water. See TDS 192 for more information on these applications.
Epoxy Resins may affect the color of white or porous stones (such as White Carrara, Thassos White, Royal Danby etc.).
Test stones for compatibility with water and cleaning additive mixture. Conduct a test area to determine compatibility with metal or steel tile.
MAINTENANCE
LATICRETE recommends using STONETECH® surface products to protect, clean and enhance stone, masonry, tile and grout surfaces. Protect surfaces from common stains by using a STONETECH sealer such as STONETECH BulletProof® Sealer. Routine maintenance should follow with STONETECH Revitalizer® Cleaner and Protector or a neutral pH cleaner such as STONETECH Stone & Tile Cleaners. For tough or difficult to remove soil use STONETECH KlenzAll™ Cleaner, a nylon scrubbing pad or a long handled stiff bristle brush. For additional information, please refer to the Grout Guide, TDS 400 and TDS 113 Cement Grout Care & Maintenance for more information.
