SKB Cases - 3i-2015-10B-E - Valise Industrielle étanche avec Mousse et Trolley

Disponible en plus de 40 configurations, la série d'étuis étanches 3i est la solution parfaite pour le rangement et le transport de vos appareils électroniques fragiles tels que équipements audio/vidéo, ordinateurs, câbles, microphones, tables de mixage et d'autres encore, qui nécessitent une protection complète contre la poussière, l'eau et les chocs.

Les étuis étanches SKB série 3I sont moulés par injection, conformes aux normes militaires et fabriqués en résine de polypropylène copolymère ultra-résistante.

Ils sont étanches, submersibles (MIL-C-4150J), résistants à l'eau, à la poussière, à la corrosion et aux chocs.

Ils disposent d'une charnière intégrée au moulage, d'un système de verrous à « mécanisme de dégagement » brevetés, d'un limiteur de pression ambiante automatique (MIL-STD-648C), d'une résistance aux rayons UV, aux solvants, à la corrosion, aux moisissures et aux chocs (MIL-STD-810F).

Dimensions :

• Longueur intérieure : 52.07 cm  
• Largeur intérieure : 39.37 cm  
• Profondeur intérieure : 25.40 cm  
• Profondeur couvercle : 5.08 cm  
• Profondeur : 20.32 cm

SKB Cases - 3i-2015-10B-E - Equipment Trolley Case waterproof

The 3I series of cases are the perfect solution for storing and transporting your A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. These injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin, featuring a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. A continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), stack securely and the cases are padlockable with a customer supplied lock. These new Mil-Standard Cases are sized to accommodate airline regulations for traveling and will fit in the overhead of an airline. This case comes with built-in pull handle and wheels and is the perfect solution to stowing all of your cables and gear when on the move.

• Built-in pull handle and wheels
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Locking loop to accept a customer supplied lock

Dimensions :

• Interior Length : 20.50 in 52.07 cm  
• Interior Width : 15.50 in 39.37 cm  
• Interior Depth : 10.00 in 25.40 cm  
• Lid Depth : 2.00 in 5.08 cm  
• Base Depth : 8.00 in 20.32 cm

SKB Cases - 3i-2015-10B-E - Equipment Trolley Case waterproof

The 3I series of cases are the perfect solution for storing and transporting your A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. These injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin, featuring a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. A continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), stack securely and the cases are padlockable with a customer supplied lock. These new Mil-Standard Cases are sized to accommodate airline regulations for traveling and will fit in the overhead of an airline. This case comes with built-in pull handle and wheels and is the perfect solution to stowing all of your cables and gear when on the move.

• Built-in pull handle and wheels
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Locking loop to accept a customer supplied lock

Dimensions :

• Interior Length : 20.50 in 52.07 cm  
• Interior Width : 15.50 in 39.37 cm  
• Interior Depth : 10.00 in 25.40 cm  
• Lid Depth : 2.00 in 5.08 cm  
• Base Depth : 8.00 in 20.32 cm

SKB Cases - 3i-2015-10B-E - Equipment Trolley Case waterproof

The 3I series of cases are the perfect solution for storing and transporting your A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. These injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin, featuring a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. A continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), stack securely and the cases are padlockable with a customer supplied lock. These new Mil-Standard Cases are sized to accommodate airline regulations for traveling and will fit in the overhead of an airline. This case comes with built-in pull handle and wheels and is the perfect solution to stowing all of your cables and gear when on the move.

• Built-in pull handle and wheels
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Locking loop to accept a customer supplied lock

Dimensions :

• Interior Length : 20.50 in 52.07 cm  
• Interior Width : 15.50 in 39.37 cm  
• Interior Depth : 10.00 in 25.40 cm  
• Lid Depth : 2.00 in 5.08 cm  
• Base Depth : 8.00 in 20.32 cm

SKB Cases - 3i-2015-10B-E - Equipment Trolley Case waterproof

The 3I series of cases are the perfect solution for storing and transporting your A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. Most sizes are available with a variety of interiors to accommodate the needs of the traveling musician. These injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin, featuring a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. A continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), stack securely and the cases are padlockable with a customer supplied lock. These new Mil-Standard Cases are sized to accommodate airline regulations for traveling and will fit in the overhead of an airline. This case comes with built-in pull handle and wheels and is the perfect solution to stowing all of your cables and gear when on the move.

• Built-in pull handle and wheels
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patent pending "trigger release" latch system
• Rubber over-molded cushion grip handle
• Locking loop to accept a customer supplied lock

Dimensions :

• Interior Length : 20.50 in 52.07 cm  
• Interior Width : 15.50 in 39.37 cm  
• Interior Depth : 10.00 in 25.40 cm  
• Lid Depth : 2.00 in 5.08 cm  
• Base Depth : 8.00 in 20.32 cm