EBS - MICROBASS 3 PREAMPLI

Le EBS MicroBass 3 est un préamplificateur complet pour basse électrique avec un chemin de signal entièrement analogique. Employant des technologies tirées des têtes d'ampli HD360 et Fafner II de la marque, il fonctionne au même niveau de signal qu'une console de mixage professionnelle, permettant de l'utiliser avec n'importe quel amplificateur de puissance.

Capable d'accepter toutes les basses grâce à son impédance de 10 Mohms, la section de préamplification comporte deux canaux : Clean et Drive, qu'il est possible de faire fonctionner en série ou en parallèle. Les deux sorties XLR peuvent être employées de deux manières : soit comme sorties indépendantes, ce qui permet de récupérer un signal post EQ sur l'une, pré EQ sur l'autre, soit comme sorties stéréo, en particulier lorsque la boucle d'effet est utilisée en mode stéréo.
Véritable station de travail, la MicroBass 3 embarque un accordeur et un compresseur identique à celui présent sur les amplis de la marque.

Ses nombreuses fonctionnalités (type de gain, type de son, bright ...) permettent de sculpter le son.

Caractéristiques :

• Préamplificateur analogique professionnel pour basse
• Deux canaux : Clean (son clair), Drive (saturé)
• Modes de fonctionnement : série / parallèle
• Niveau de saturation : HI (haute) / LO (faible)
• Sélecteurs : Bright (brillance) / Character (activation EQ), Bypass, Gain et Type
• Type de saturation : Thin / Deep (plus de basses)
• Entrées : jack normal et drive, entrée auxiliaire 3,5 mm
• Sorties : 2x XLR, soit indépendantes, soit stéréo (si boucle d'effet réglée sur stéréo)
• Sortie casque format minijack
• Boucle d'effets : envoi et retour, mono ou stéréo
• Contrôles Clean : gain, treble, middle et notch (semi-paramétrique), bass, compresseur
• Contrôle Drive : drive, tonalité, middle et notch (semi-paramétrique), level, blend (mélange canaux)
• Master volume
• Commutateurs au pied : Mute, Drive
• Alimentation électrique : 9V DC 450 mA (bloc secteur inclus)

EBS - MICROBASS 3 PREAMP

The EBS MicroBass 3 is a complete preamplifier for electric bass with a fully analog signal path. Using technologies from the brand's HD360 and Fafner II amp heads, it operates at the same signal level as a professional mixing console, allowing it to be used with any power amplifier.

Capable of accepting all bass thanks to its 10 Mohms impedance, the preamplification section has two channels: Clean and Drive, which can be operated in series or in parallel. The two XLR outputs can be used in two ways: either as independent outputs, which allows you to recover a post EQ signal on one, pre EQ on the other, or as stereo outputs, in particular when the effect loop is used in stereo mode.

A true workstation, the MicroBass 3 has a tuner and a compressor identical to that found on the brand's amplifiers.

Its many features (type of gain, type of sound, bright ...) allow you to sculpt the sound.

Features:

• Professional analog preamplifier for bass
• Two channels: Clean (clear sound), Drive (saturated)
• Operating modes: series / parallel
• Saturation level: HI (high) / LO (low)
• Selectors: Bright (Character) (EQ activation), Bypass, Gain and Type
• Type of saturation: Thin / Deep (more bass)
• Inputs: normal jack and drive, 3.5 mm auxiliary input
• Outputs: 2x XLR, either independent or stereo (if effect loop set to stereo)
• Headphone output in minijack format
• Effects loop: send and return, mono or stereo
• Clean controls: gain, treble, middle and notch (semi-parametric), bass, compressor
• Drive control: drive, tone, middle and notch (semi-parametric), level, blend (mix channels)
• Master volume
• Foot switches: Mute, Drive
• Power supply: 9V DC 450 mA (power supply included)

EBS - MICROBASS 3 PREAMP

The EBS MicroBass 3 is a complete preamplifier for electric bass with a fully analog signal path. Using technologies from the brand's HD360 and Fafner II amp heads, it operates at the same signal level as a professional mixing console, allowing it to be used with any power amplifier.

Capable of accepting all bass thanks to its 10 Mohms impedance, the preamplification section has two channels: Clean and Drive, which can be operated in series or in parallel. The two XLR outputs can be used in two ways: either as independent outputs, which allows you to recover a post EQ signal on one, pre EQ on the other, or as stereo outputs, in particular when the effect loop is used in stereo mode.

A true workstation, the MicroBass 3 has a tuner and a compressor identical to that found on the brand's amplifiers.

Its many features (type of gain, type of sound, bright ...) allow you to sculpt the sound.

Features:

• Professional analog preamplifier for bass
• Two channels: Clean (clear sound), Drive (saturated)
• Operating modes: series / parallel
• Saturation level: HI (high) / LO (low)
• Selectors: Bright (Character) (EQ activation), Bypass, Gain and Type
• Type of saturation: Thin / Deep (more bass)
• Inputs: normal jack and drive, 3.5 mm auxiliary input
• Outputs: 2x XLR, either independent or stereo (if effect loop set to stereo)
• Headphone output in minijack format
• Effects loop: send and return, mono or stereo
• Clean controls: gain, treble, middle and notch (semi-parametric), bass, compressor
• Drive control: drive, tone, middle and notch (semi-parametric), level, blend (mix channels)
• Master volume
• Foot switches: Mute, Drive
• Power supply: 9V DC 450 mA (power supply included)

EBS - MICROBASS 3 PREAMP

The EBS MicroBass 3 is a complete preamplifier for electric bass with a fully analog signal path. Using technologies from the brand's HD360 and Fafner II amp heads, it operates at the same signal level as a professional mixing console, allowing it to be used with any power amplifier.

Capable of accepting all bass thanks to its 10 Mohms impedance, the preamplification section has two channels: Clean and Drive, which can be operated in series or in parallel. The two XLR outputs can be used in two ways: either as independent outputs, which allows you to recover a post EQ signal on one, pre EQ on the other, or as stereo outputs, in particular when the effect loop is used in stereo mode.

A true workstation, the MicroBass 3 has a tuner and a compressor identical to that found on the brand's amplifiers.

Its many features (type of gain, type of sound, bright ...) allow you to sculpt the sound.

Features:

• Professional analog preamplifier for bass
• Two channels: Clean (clear sound), Drive (saturated)
• Operating modes: series / parallel
• Saturation level: HI (high) / LO (low)
• Selectors: Bright (Character) (EQ activation), Bypass, Gain and Type
• Type of saturation: Thin / Deep (more bass)
• Inputs: normal jack and drive, 3.5 mm auxiliary input
• Outputs: 2x XLR, either independent or stereo (if effect loop set to stereo)
• Headphone output in minijack format
• Effects loop: send and return, mono or stereo
• Clean controls: gain, treble, middle and notch (semi-parametric), bass, compressor
• Drive control: drive, tone, middle and notch (semi-parametric), level, blend (mix channels)
• Master volume
• Foot switches: Mute, Drive
• Power supply: 9V DC 450 mA (power supply included)

EBS - MICROBASS 3 PREAMP

The EBS MicroBass 3 is a complete preamplifier for electric bass with a fully analog signal path. Using technologies from the brand's HD360 and Fafner II amp heads, it operates at the same signal level as a professional mixing console, allowing it to be used with any power amplifier.

Capable of accepting all bass thanks to its 10 Mohms impedance, the preamplification section has two channels: Clean and Drive, which can be operated in series or in parallel. The two XLR outputs can be used in two ways: either as independent outputs, which allows you to recover a post EQ signal on one, pre EQ on the other, or as stereo outputs, in particular when the effect loop is used in stereo mode.

A true workstation, the MicroBass 3 has a tuner and a compressor identical to that found on the brand's amplifiers.

Its many features (type of gain, type of sound, bright ...) allow you to sculpt the sound.

Features:

• Professional analog preamplifier for bass
• Two channels: Clean (clear sound), Drive (saturated)
• Operating modes: series / parallel
• Saturation level: HI (high) / LO (low)
• Selectors: Bright (Character) (EQ activation), Bypass, Gain and Type
• Type of saturation: Thin / Deep (more bass)
• Inputs: normal jack and drive, 3.5 mm auxiliary input
• Outputs: 2x XLR, either independent or stereo (if effect loop set to stereo)
• Headphone output in minijack format
• Effects loop: send and return, mono or stereo
• Clean controls: gain, treble, middle and notch (semi-parametric), bass, compressor
• Drive control: drive, tone, middle and notch (semi-parametric), level, blend (mix channels)
• Master volume
• Foot switches: Mute, Drive
• Power supply: 9V DC 450 mA (power supply included)