|
||||||
*Specially designed for Ford series vehicles: for Ford TPMS relearning tool can be used to reset and activate tire pressure sensors on any for Ford, for Mazda, for Lincoln, and for Mercury vehicleswith tire pressure sensor systems. Please check the applicable latest models in the product description.
*Easy to Use: Super TPMS19 TPMS activation tool with ease, faster operation, activates the in dividual TPMS sensors by pressing one button.
*Replacement for P/N: 8C2Z1A203A, 8C2Z-1A203-A, 8C2T-1A203-AB,TPMS19.
*Necessary repair tools: After replacing the tires （summer and winter tires exchang）/ the tire sensor updated/ tire rotaion, you can use this Ford TPMS reset tool to reset tire sensor to turn off the TPMS warning light.
*Super mini TPMS tool: Portable waterproof Ford TPMS reset tool, you can put it in your pocket or toolbox and anywhere else, very convenient and easy to use.
How To Use
How to Train for Ford Tire Pressure Monitior Sensors TPMS?
1. Turn the ignition switch to the OFF position, then press and release the brake pedal.
2. Cycle the ignition switch from the OFF position to the RUN position for 3 times, ending in the RUN position.
3. Press and release the brake pedal.
4. Turn the ignition switch to the OFF position.
5.
Turn the ignition switch from the OFF position to the RUN position 3
times, ending in the RUN position.The horn will sound once and the TPMS
indicator will flash if the training mode has been entered
successfully.If equipped, the message center will display TRAIN LF TIRE.
6.
Place the tire pressure monitor activation tool on the LEFT (Driver's
Side) FRONT tire sidewall at the valve stem.Press and release the test
button repeatedly on the TPMS Tool until the horn beeps.(It may take up
to 6 seconds for the tool to activate the sensor, Leave the tool on the
sidewall for the entire 6 seconds).The horn beeping indicates that the
body control module has recognized the TPMS sensor.
7. Within 2
minutes of the horn sounding confirming programming of the LF tire,place
the TPMS tool on the RIGHT (Passenger's Side) FRONT tire sidewall at
the valve stem and press the test button to activate the sensor.
8.
Repeat step 7 for RIGHT REAR followed by LEFT REAR tire in that order.
The procedure is complete after the last tire has been trained.When
training is complete, the message center (if equipped) will display TIRE
TRAINING COMPLETE.For vehicles not equipped with a message center,
successful completion of the training procedure is verified by turning
the key to the OFF position without the horn sounding. If the horn beeps
twice when the switch is turned to OFF the training procedure was not
successful.
This is direct fit for the vehicles below:
for 2007-2016 Ford F-150
for 2008-2016 Ford F-250 F-350 F-450 F-550 Super Duty
for 2010-2016 Ford Mustang
for 2007-2014 Ford Edge
for 2006-2016 Ford Escape
for 2008-2016 Ford Expedition
for 2006-2016 Ford Explorer
for 2008-2015 Ford Flex
for 2008-2016 Ford Taurus
for 2008-2016 Ford E-150 E-250 E-350 E-450 Econoline Vans
for 2008-2016 Ford Fiesta
for 2008-2016 Ford Focus
for 2008-2016 Ford Fusion
for 2008-2011 Ford Crown Victoria
for 2011-2016 Ford Transit Connect
for 2006-2011 Ford Ranger
for 2007-2016 Lincoln MKX
for 2007-2016 Lincoln MKT
for 2008-2016 Lincoln MKZ
for 2008-2016 Lincoln MKS
for 2008-2016 Lincoln Navigator
for 2008-2011 Lincoln Town Car
for 2007-2008 Lincoln Mark LT
for 2006-2010 Mercury Mountaineer
for 2006-2010 Mercury Monterey
for 2006-2011 Mercury Mariner
for 2006-2011 Mercuy Grand Marquis
for 2006-2011 Mercury Milan
Note
*If the vehicle or wheels/sensors have been stationary for more than 30
minutes, the sensors will go into a "sleep mode" to conserve battery
power. It is necessary to wake them up by simply moving them or rolling
the tires before they will communicate with the vehicle.
*The TPMS
training procedure must be done on one vehicle at a time, in an area
without radio frequency interference-at least 3 feet away from other
vehicles equipped with TPMS sensors.
*Vehicles with different tire
pressures front-rear like F-Series trucks and E-Series vans also require
TPMS re-training after a tire rotation. Failure to train the sensors
will cause the TPMS warning light to illuminate on the dash.
Applicable models：For Ford
For P/N：8C2Z1A203A, 8C2Z-1A203-A, 8C2T-1A203-AB,TPMS19
Batteries：Lithium Metal batteries required
Package Included
1 x Tire Pressure Monitoring Sensor For Ford
The package will be delivered within the promised time shown on the order. Normally,the displayed time will be longer than actual time.
Package will arrive in 10-25 business days. The arrival time depends on some factors and different areas.
Please Note: Import duties, taxes, and charges are not included in the item price or shipping fee. These charges are the buyer's responsibility.
If you buy goods in a big way ,please contact us to enquiry a lower price !!!!!!!!
Our working time:
Beijing time:Monday to Saturday 8:00 am to 5:00 pm
We do not work in holidays of China
We will reply your email in 24 hours.
If you are not satisfied with the product or service,please contact us and don't give us
negative or natural feedback,We will give you a satisfactory solution.