MONSTER TRUCK EMXT-1 BRUSHLESS OFF-ROAD 1-10 RTR 4WD

2015 MODEL WITH 2.4 Ghz RADIO LIPO BATTERY, LIPO BATTERY CHARGER AND CROWN COVER HIMOTO COD.2101BL

WITH HIMOTO ENGINE BRUSHLESS KV-6.5T - KV3500 SENSORED (WITH SENSOR CABLE THAT COMMUNICATES DIRECTLY WITH THE ESC) THANKS TO THIS SYSTEM, THE ESC COMMUNICATES DIRECTLY WITH THE MOTOR, RECOGNIZING ITS EXACT POSITION (ROTOR) AT ANY MOMENT, SO ESPECIALLY AT START-UP YOU CAN AVOID THOSE ANNOYING PROBLEMS AT 100 X 100 AND JUMP ... ENSURING FLUIDITY AND ACCELERATION CONSIDERABLY HIGHER THAN COMMON BRUSHLESS SENSORLESS MOTORS (WITHOUT SENSORS)

This particular brushless motor is a permanent magnet electric motor which unlike a brush motor, does not need sliding electrical contacts on the motor shaft to operate (hence the name). The switching of the current circulating in the windings, in fact, no longer takes place mechanically (through the sliding contacts), but electronically. This results in a lower mechanical resistance, eliminates the possibility of sparks forming as the rotation speed increases, and considerably reduces the need for periodic maintenance. AN INNOVATIVE ELECTRIC MOTOR THAT HAS BEEN REPLACING THE OLD BRUSHED MODEL ON THE MARKET FOR A LONG TIME (ELECTRIC MOTOR WITH BRUSHES)

SCALE 1:10 4WD - RTR

Long awaited by all true enthusiasts, the powerful electric model with electric motor BRUSHLESS 6.5T - KV-3500

UNLIKE SIMILAR MODELS, THE EMXT-1 IS FITTED WITH A MORE POWERFUL HIMOTO BRUSHLESS ELECTRIC MOTOR 6.5T - KV-3500, GUARANTEE OF POWER AND RELIABILITY CONFIRMING ITSELF AMONG THE FIRST OF THE MOST POWERFUL OF ITS CATEGORY

OVER 80 KM / H OF SPEED.

EQUIPPED WITH THE EXCELLENT DIRECTIONAL SERVANT FROM 6kg WATERPROOF HIMOTO READY AND PRECISE IN THE RESPONSE OF COMMANDS

MANAGED BY ESC HIMOTO FROM 60A

(ELECTRONIC SPEED CONTROL) WHICH UNLIKE SIMILAR MODELS IS EQUIPPED WITH A FAN SUPERIMPOSED TO THE LAMELLAR SYSTEM DEDICATED TO THE CONTINUOUS COOLING OF THE ESC. IT IS FULLY PROGRAMMABLE THROUGH THE KEY OVERLAPPING FROM WHICH DIFFERENT SETTINGS CAN BE SELECTED LIKE;

STARTING MODE - ENGINE BRAKE - VOLTAGE - MOTOR ROTATION AND ITS SETTINGS - BATTERY TYPE

TECHNICAL DATA OF THE REGULATOR:

1- POWER: DIRECT CURRENT 80A, PEAK CURRENT 380A.

2- POWER SUPPLY: 4-9 NiMH / NiCd cells or 2-3 LiPo cells.

3-BEC Output: 6V / 1.5A.

4- Resistance: 0.00075 Ohm.

5- Supported Motors: Brushless motors with sensors (sensored)

6- Compatible with Brushless motors: 5.5T and> 5.5T

7- Suitable for monster cars: 1/10 on-road or off-road cars / trucks for

normal race or sportful race.

8- size: 31.5mm (L) * 27.5mm (W) * 24mm (H).

9- weight: 32g

CHARACTERISTICS OF THE REGULATOR

1- compatible with motors with sensors

2- Built using only quality components.

3- Excellent response at the start, linearity of delivery, no coccing

4- equipped with race mode, without reverse, or normal, with forward gear and

backwards.

5- 4 parameters for adjusting the braking force.

6- adjustable abs, and drag brke on 8 positions

7- 4 starting modes (called "Punch") from "Soft" to "Very aggressive ".

8- multiple protection modes: Low voltage cut-off protection

lithium battery protection / overheating protection / fail safe / Motor blocked protection.

9- PROGRAMMING adjustable on 8 points.

10 - simply programmable with a button located on the controller (or using a pocket programm card not included in the package).

IT IS COMPLETE WITH 2.4GHZ RADIO WITH FAIL-SAFE SYSTEM INTEGRATED IN THE RECEIVER FULLY PROGRAMMABLE FROM REMOTE CONTROL, WHOSE PURPOSE IS TO AVOID THAT IN FOLLOWING LOSS OF CONTACT BETWEEN RADIO AND RECEIVER DO NOT LEAVE OUR MODEL OUT CONTROL (LEADING TO NEED SERVO E MOTOR IN NEUTRAL POSITION)

2.4GHZ DIGITAL REMOTE CONTROL WITH AUTOMATIC FREQUENCY SEARCH (DEFINITELY ELIMINATING RADIO INTERFERENCE PROBLEMS) AND PROPORTIONAL SYSTEM (THAT IS THE POSITION OF CONTROL OF THE MODEL IS PROPORTIONAL TO THE POSITION OF THE CONTROL BAR ON THE TRANSMITTER)

ALREADY COMES WITH THE LIPO BATTERY 2700MAH 7.4V 2S (WITH A PEAK OF 50C AND CONTINUOUS FROM 30C) AND THE LIPO BATTERY CHARGER WITH 2 AND 3 CELL BALANCER

THE EMXT-1 MODEL

OFF-ROAD MONSTER-TRUCK PRESENTS ITSELF WITH THE IMPORTANT BALL BEARINGS,

AND "EIGHT" OIL SHOCK ABSORBERS WITH ALUMINUM HEAD,

UNLIKE OTHER SIMILAR MODELS THE EMXT-1 MODEL IS MOUNTED ON A STRONG USED BOTTOM TRAY CHASSES FREQUENTLY ON THESE MODELS, AND UPPER CHASSES IN ergal . SOFT FRONT AND REAR BUMPER MOUNT

AND IT IS 4 4WD DRIVE WHEELS WITH CENTRALLY MOUNTED BRUSHLESS ELECTRIC MOTOR AND CONNECTED BY A CENTRAL TRANSMISSION SHAFT WITH 2 DIFFIRENTIAL BOXES (FRONT AND REAR) TO COMPLETE THE TRANSMISSION 2 SATELLITES AND TRANSMISSION HEADS ENTIRELY MOUNTED ON STEEL BEARINGS.

IN THE END: THE FRONT OFFERS VARIOUS TYPES OF ADJUSTMENTS: TOE, BELL, HEIGHT FROM THE GROUND. WHILE THE REAR TRAIN: BELLING AND HEIGHT FROM THE GROUND

DATA SHEET
-Length: 400mm
-Width: 310mm
-Height: 185mm
- Wheelbase: 275mm
- Gear ratio: 10.3: 1
-Wheels diameter: 118mm
-KV3500 brushless motor
-6.5T complete with sensor connection
-Himoto brushless'60A speed regulator
-DESCRIPTION
-Power: continuous current 80A, peak current 380A.
-Power supply: 4_9 cells NiMH / NiCd or 2_3 cells LiPo.
-BEC Output: 6V / 1.5A.
-Resistance: 0.00075 Ohm.
-Supported Motors: Brushless motors with sensors (sensored)
-Compatible with Brushless motors: 5.5T and> 5.5T
-Can be used on 1/10 on_road or off_road cars models
-Dimensions: 31.5mm (L) * 27.5mm (W) * 24mm (H).
- weight: 32g
- The package includes:
- 7.4V 2S rechargeable 2700mAh lipo battery
-Digital Lipo charger with cell balancer
- Bodywork complete with stickers kit
-Electronic speed control system with fan
-Himoto 2.4Ghz digital radio control HTX_242T
- Illustrated instruction booklet

AVAILABLE IN DIFFERENT COLORS

PROFESSIONAL RACING MODEL WITH CHROME WHEELS!

4WD TRACTION - 4 DRIVE WHEELS

VIDEO