Product name: Car dust blower Material: ABS+PC Colour: Black Working voltage: 12V Working current: 3A-8A Maximum output power: 100W Working life: ≥500 times Motor type: carbon brush motor (50000 rpm) Vacuum degree: 7.8+15%/-10%KPA Motor overcurrent protection: yes Battery capacity: 6000mAh Charging time: about 3-4h Charging method: Type-C charging port Charging voltage/current: 5V/2A Charging input power: 10W Working temperature: 20℃-50℃ Working time: 35 minutes at low speed, 20 minutes at high speed Inflation speed: 350-400L/min Inflation pressure range: 15-20KPA Working noise: distance 1 meter less than or equal to 85dB Size: about 180*79*48mm/7.09*3.11*1.89 inch Applicable scene: clean blowing dust for household cars. Inflatable swimming pools, balloons, swimming rings, inflatable toys, inflatable mattresses, inflatable rubber boats, hovercraft, etc. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.
Feature:
1. Small size, light weight, novel appearance, using 12V high-speed carbon brush motor 6000mAh battery for longer battery life and full of power.
2. Button: long press to turn on the fan to enter the low-speed state, then short press to switch between high and low gears, long press to turn off the fan, double-click to turn on the working state of the white lighting LED, double-click again to change the lighting mode (every double-click to change the mode) 1 Always on, 2 slow flashes, 3 fast flashes, 4 off, cyclic switching.
Specification:
Product name: Car dust blower
Material: ABS+PC
Colour: Black
Working voltage: 12V
Working current: 3A-8A
Maximum output power: 100W
Working life: ≥500 times
Motor type: carbon brush motor (50000 rpm)
Vacuum degree: 7.8+15%/-10%KPA
Motor overcurrent protection: yes
Battery capacity: 6000mAh
Charging time: about 3-4h
Charging method: Type-C charging port
Charging voltage/current: 5V/2A
Charging input power: 10W
Working temperature: 20℃-50℃
Working time: 35 minutes at low speed, 20 minutes at high speed
Inflation speed: 350-400L/min
Inflation pressure range: 15-20KPA
Working noise: distance 1 meter less than or equal to 85dB
Size: about 180*79*48mm/7.09*3.11*1.89 inch
Applicable scene: clean blowing dust for household cars. Inflatable swimming pools, balloons, swimming rings, inflatable toys, inflatable mattresses, inflatable rubber boats, hovercraft, etc.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1*Charging Cable
4*Accessories
1*Instruction