Pair of Load Sensing Valve Springs for both Left & Right valves. Upgrade Replacement Load Sensing Valve Spring or Brake Compensator (Bias) Valve Spring, as they are also known.
Please check your fitting against the listing photo's provided for compatibility. These replacement springs look a little different to your old ones as you can see from the photo, this is due to a far more reliable adjustment method, however, it's looks are totally irrelevant, it will fit and do exactly the same job. The most important point is setting the pre-tension correctly, if you are unsure How to do this, please just ask. By just replacing the spring and not having a new Load Sensing Valve fitted unnecessarily, you could save up to £500+ If your vehicle failed the MOT test on Failure Code: 1.1.17(a), it is highly unlikely that you need a new Load Sensing Valve, which can, and usually does turn out to be very expensive with seized pipe glands and mounting bolts, having to re-join the pipes where they had to be cut, bleeding the whole braking system, and 99% of the time is totally unnecessary, simply just replace the spring, job done, and at a fraction of the cost. Occasionally the valve pins temporarily seize especially if the springs have been snapped a while, or if the adjusters has slipped, (mine can't slip). In these cases, the valves can usually be freed up with a sharp tap on the lever arm over the pins. If you still need any more fitting advice even after purchase, please feel free to contact me at any point. Any postal delays are obviously beyond our control, and Will be subject to the rules and regulations set out by the Courier's claims Process, i.e. Royal Mail, "Your item is only considered Lost in the UK 10 working days after due delivery date". NORWAY: Delivery can take many weeks for unknown reasons, please bear this in mind when ordering. |