7.4V Lipo Battery 2S 1400mAh T-Plug & JST XH-3P Connector for 1/10 1/16 1/18 RC
7.4V Lipo Battery 2S 1400mAh 30C
About this item
- Parameters: Battery Voltage: 7.4V; Capacity: 1400mAh; Discharge Rate: 30C; Connector: Deans/T-plug; Material: Lithium Polymer; Dimensions: 53 * 29 * 15mm(L*W*H); Weight: 57.18g
- Wide application: This 7.4V lipo battery is campatible with most 1/10, 1/16, 1/18, 1/24 scale remote control cars, but please make sure if the voltage(7.4v), dimension and the plug(Deans) match your equipment
- Efficient charging: Compared with other 2s lipo batteries, our 30C lipo battery can be charged quickly and continuously at any time, in addition, the battery has no memory effect and does not need to be fully discharged before charging
- AB clip special design: AB clips in 2S RC battery's XH-3pin charging connector can protect the battery charging cable, which will help you plug and unplug the charging cable quickly and easily
- Long cycle life: Our 1400mAh lipo battery's life is 30% longer than other products on the market, which can recycle at least 500 times. If there is any problem with the battery you received, please contact us as soon as possible, we will give you a satisfactory solution
Product Description
The 2S 1400mAh Lipo Battery can be used in RC car. High power and high capacity provide your RC
vehicle more energy, more enjoyment.
Wide application
- RC Cars
- RC trucks
- Drone
- RC Boats
- Airplane
- Helicopters
It fits A xial SCX24 RC car WL toys and most 1/10 1/16 1/18 1/24 RC racing cars. Only if the voltage, dimension and the plug match,
then it will fit.
Specification
Material: Lithium Polymer
Battery Voltage: 7.4V
Configuration: 2S1P
Capacity: 1400mAh
Discharge Rate: 30C
Connector: T-plug & JST-XH 3P
Approx Weight: 57.18g
Battery Dimension: 53*29*15mm/ 2.08*1.14*0.59inch (L*W*H)
2-in-1 USB Balance Charger Cable 1A
About this item
- [Efficient charging] - The lipo battery charger is specially used for charging 7.4V lithium polymer battery, input: DC 5V, output current: 1000mA, it is not recommended to use batteries below 500mah.
- [Circuit Protection] - The 2s battery charging cable has over-voltage, overload and short-circuit protection functions. This LiPo battery USB charger is only suitable for 7.4V LiPo batteries. It is equipped with a xh-3 pin plug. Please make sure that the voltage and the plug match before use!
- [Indicator light] - The lipo battery USB charger cable has an indicator light, the green light is flashing and the red light is solid when it is charging; the green light and the red light are off when it is fully charged; if the red light is flashing quickly, it means an alarm.
- [Lightweight and Convenient] - This entry-level battery charging cable is only 31g, very light and convenient for you to carry around.
- [Widely used] - This 2s scx24 battery charger is widely applicable to splatter ball gun, RC cars, trucks, drones, airplanes, quadcopters, helicopters, gliders, UAV RTR RTF. We recommend that you use it at a voltage of 7.4V below 2000mAh.
|
|
|
|---|---|---|
Special designAB clips can protect the battery charging cable and help you plug and unplug the charging cable quickly and easily | Longer using lifeThe battery can be used continuously for more than 300 cycles of charging and discharging | High qualityOur batteries are safer and less prone to expansion, which last 30% longer |
