Canon EOS 600Da Astrokamera, Astromodifiziert - 2 Jahre Gewährleistung

Lieferumfang:
  • Canon EOS 600Da mit Kameradeckel und Augenmuschel
  • Canon Original Akku LP-E8
  • Canon Original Ladegerät LC-E8 mit Kabel
  • abnehmbare Sucherabdeckung zur Vermeidung von Streulicht

Auswirkungen der Modifikation:
Durch die Modifikation erhöht sich die Empfindlichkeit der Kamera im nahen Infrarotbereich. Insbesondere ist die Kamera dadurch deutlich empfindlicher für die H-alpha Wellenlänge von 656,28nm, welche in der Astrofotografie eine sehr wichtige Rolle spielt.

Was passiert beim Umbau?
Beim Umbau wird der sogenannte Lowpass Filter 2 ersatzlos entfernt. Da dieser Filter einen zu Luft verschiedenen Brechungsindex hat muss die Position des Sensors für ein korrektes Auflagemaß angepasst werden. Hierfür wird mit Präzisionswerkzeug der Sensor auf ca. +-0.01mm korrekt justiert. Somit bleibt nach der Modifikation der Autofokus erhalten und es ist garantiert, dass man mit allen Objektiven auf unendlich fokussieren kann, was ein häufiges Problem bei einem DIY Umbau ist. Aufgrund der Präzisionswerkzeuge ist auch garantiert, dass der Sensor nach dem Umbau nicht verkippt ist, was essenziell für ein scharfes Bild bis in die Ecken ist.

Da der Lowpass Filter 1 nicht entfernt wird bleibt bei dieser Modifikation auch die automatische Sensorreinigung erhalten.
Zustand der Kamera:
Die Kamera ist gebraucht und wurde von uns generalüberholt, d.h. nach der Modifikation wurde diese gründlich auf Funktionalität geprüft und dann gereinigt.

Hervorragend: Fast neuwertiger Zustand. Kaum bis keine Gebrauchsspuren und die Anzahl der Auslösungen ist gering.

Sehr gut: Sehr guter Zustand. Kleiner Abnutzungsspuren sind teils sichtbar.

Gut: Guter Zustand. Abnutzungsspuren (kleinere Kratzer am Gehäuse etc.) sind an manchen Stellen vorhanden.

Okay: Der Zustand ist in Ordnung. Teils sind größere Abnutzungsspuren zu erkennen. Leichte Kratzer sind ggf. auf dem Display vorhanden.

Gewährleistung und Rückgabe:
Auf die Kamera gewähren wir 1 Jahr Gewährleistung. Außerdem besteht ein 30-Tägiges Rückgaberecht ohne Angabe von Gründen. Bei jeglichen Problemen mit der Kamera (auch nach dem 1 Jahr Gewährleistung) stehen wir ihnen gerne jederzeit zur Verfügung.

Anzahl der Auslösungen:
Die Anzahl der Auslösungen gibt an wie oft der mechanische Verschluss vor dem Sensor schon ausgelöst wurde. Das ist relevant, da dieses mechanische Bauteil nach einer gewissen Anzahl an Auslösungen defekt geht. Bei den meisten APS-C Kameras von Canon hält der Verschluss ca. >100.000 Auslösungen stand. Bei Vollformat liegt diese Zahl bei ca. >150.000 Auslösungen.

Bei den hier angebotenen Kameras liegt die Anzahl der Auslösungen bei <30.000.

FAQ:

Kann man die Kamera auch am Tag verwenden?
Dadurch, dass der Lowpass Filter 2 entfernt wurde erhalten die Bilder einen Rotstich. Dies kann man entweder in der Kamera mit einem manuellen Weißabgleich oder dann in der Nachbearbeitung im RAW Dateiformat am PC korrigieren. Das ist jedoch umständlich und funktioniert nicht immer perfekt, daher gibt es den sogenannten OWB (Original White Balance) Clip-Filter, welcher die Funktion des Lowpass Filter 2 wieder herstellt.

Welches Kameramodell sollte ich wählen?
Grundsätzlich sind die Kameras von Canon in zwei Kategorien einzuteilen: APS-C und Vollformat. Dabei sind die APS-C Sensoren kleiner als die Sensoren von Vollformat Kameras. Ein größerer Sensor bekommt natürlich mehr Licht ab, als ein kleiner Sensor, deswegen haben Vollformat Kameras in der Regel einen Vorteil gegenüber APS-C Kameras für die Astrofotografie. Bei den Vollformatkameras ist die Canon 6Da sehr beliebt unter Astrofotografen.

Bei den APS-C Kameras gibt es viele Möglichkeiten. Die 600Da ist sehr weit verbreitet für die Astrofotografie und funktioniert auch sehr gut mit den gängigen Aufnahmeprogrammen wie APT oder N.I.N.A. Die Nachfolger (650Da und 700Da) ähneln der 600Da stark, aber bringen ein paar praktische zusätzliche Features, wie z.B. einen Touch Display. Wer bei seiner Kamera gerne noch WLAN dazu hätte sollte z.B. die 200Da oder 750Da in betracht ziehen.

Die Kameramodelle sind oft sehr alt, ist das ein Problem?
Obwohl viele Modelle recht alt sind ist die Bildqualität dennoch sehr gut. Da bei neueren Modellen oft der Fokus auf für die Astrofotografie irrelevante Dinge gelegt wird (z.B. Autofokus, Bildstabilisierung, Video) macht es vom Preis Leistungsverhältnis in der Regel weniger Sinn eine solche Kamera für die Astrofotografie zu kaufen.

Was ist der Unterschied zwischen einer Astromodifikation und einem Vollspektrum Umbau?
Bei der Astromodifikation wird nur der Lowpass Filter 2 ersatzlos ausgebaut. Bei einem Vollspektrum Umbau werden beide Lowpass Filter ausgebaut und dadurch erreicht das komplette Spektrum des Lichts den Sensor. Für Infrarotaufnahmen macht daher ein Vollspektrum Umbau Sinn.

Für die Astrofotografie ist ein solcher Umbau jedoch in der Regel eher unpraktisch, da durch das entfernen des Lowpass Filter 1 nun auch sehr viel Licht im infraroten Spektrum auf den Sensor trifft und dieses Licht wird durch Objektive oder Teleskope meist nicht richtig fokussiert. Man erhält einen sogenannten Halo um die Sterne, was unschön ist. Um das zu umgehen kann man einen UV/IR Cut Filter einsetzen, was die Funktion des Lowpass Filter 1 wieder herstellt.

Bei einer Astromodifikation ist kein Filter für die Astrofotografie zwingend notwendig.

Was kann schief gehen, wenn man die Kamera selbst umbaut?
Es gibt viele Anleitungen für einen solchen Umbau im Internet, jedoch hat man ohne spezielles Werkzeug keine Chance das Auflagemaß des Sensors wieder korrekt einzustellen. Bringt man den Sensor auf die selbe Position zurück, so funktioniert der Autofokus nicht mehr und man kann ggf. mit einigen Objektiven nicht mehr auf unendlich fokussieren. Justiert man den Sensor näher ans Bajonett, so wird man ohne Präzisionswerkzeug zwangsläufig eine Verkippung des Sensor verursachen und somit werden Bildränder nicht mehr scharf abgebildet.

Ein weiteres Problem bei der Modifikation ist Staub, welcher beim Umbau zwischen dem Filter und dem Sensor gelangt. Dieser kann von der Sensorreinigung nicht entfernt werden und bildet schwarze Punkte auf den Bildern ab. Daher ist es ohne Reinraumtechnik kaum möglich einen sauberen Umbau durchzuführen.

Dies ist ein gewerbliches Angebot; die Rechnungsstellung erfolgt ohne Ausweis der Umsatzsteuer nach §19 UStG.





Canon EOS 600Da Astronomy Camera, Astro modified - 2 Year Warranty

Scope of delivery:
  • Canon EOS 600Da with camera lid and eyecup
  • Canon Original Battery LP-E8
  • Canon Original Charger LC-E8 with cable
  • removable viewfinder cover in order to reduce scattered light

Impact of modification:
The Modification increases the sensetivity of the camera in the near infrared. Especially the H-alpha wavelength with 656,28nm which is important for astrophotography is increased significantly.

What happens during the modification?
In the modification the lowpass filter 2 is removed. Since this filter has a different refractive index than air it is necessary to adjust the position of the sensor to achieve correct backfocus. For this we use high precission tools that guarantee, that the sensor is in +-0.01mm of the correct position. Thus autofocus still works after modification and it is guaranteed that all lenses are able to focus to infinity, which is a common problem with DIY modifications. Furthermore because of the precission tools the sensor is guaranteed to be orthogonal to the bajonett after modification, which is essential for a sharp image up to the cornes.

Since the lowpass filter 1 is not removed the automatic sensor cleaning is still available.

Condition of the camera:
The camera is used and got refurbished by us. That means we throughly tested the camera after modification and cleaned it. Of course there are going to be normal minor signs of wear visible on the camera on closer inspection.

Warranty and return:
On this camera we grant 1 year of warranty. There also is a 30-day return policy. If there happen to be any issues with the camera (even after the warranty) we gladly like to help out.

Shuttercount:
The shuttercount indicates how often the mechanical shutter has been used. This is relevant because this mechanical shutter wears over time and is going to malfunction at some point. The shuttercount gives an indication as to how worn out the shutter is. Canon APS-C cameras are usually rated to last >100.000 shutter actuations. Fullframe cameras are usually rated to last >150.000 shutter actuations.

The shuttercount for the cameras offered here is <30.000.

FAQ:

Is it possible to use the camera during the day?
Since the lowpass filter 2 was removed all images are going to have a red color cast to them. This can be fixed by using a custom white balance either in the camera or while post-processing with RAW images. This however is rather tedious, that is why there exists the OWB (original white balance) Clip-Filter which mimics the functionality of the removed lowpass filter 2.

Most astromodified cameras are quite old, is that a problem?
Even though a lot of these cameras have been released almost a decade ago they are still very capable for astrophotography. Newer bodys often times have for example better autofocus, in body image stabilization or video capabilities which are all features that are irrelevant for astrophotography. This makes these newer cameras quite expensive without gaining much for astrophotography.

Whats the difference between a astro modification and a fullspectrum modification?
In an astromodification only the lowpass filter 2 is removed. In a fullspectrum modification both lowpass filters are removed. This allows the whole spectrum of light to reach the sensor. This is ideal for infrared photography.

For astrophotography however this is inconvenient since without the lowpass filter 1 infrared light reaches the sensor which causes halos around stars. To combat this you can use an UV/IR Cut filter which mimics the functionality of the removed lowpass filter 1.

An astro modification does not need any additional filters to be installed.

What can go wrong by modifying a camera yourself?
There are many guides for such a modification online but without proper tools a modification is going to be prone to errors. For one without precission tools it is impossible to achieve the correct backfocus. That means the autofocus is going to be inaccurate and also that some lenses might not be able to achieve focus at infinity. Furthermore there is a good chance that the sensor is going to have tilt after the modification which ruins image quality in the corners.

Another issue is dust which gets between the sensor and the remaining filter. This dust can not be removed by the automatic sensor cleaning and renders black dots in images. Therefore it is not possible to do a clean modification without clean rooms standards.

This is a commercial offer; the invoice does not include value added taxation in accordance to §19 UStG