Same Day Shipping before 1:00pm Free Shipping to the Continental US Hassle Free Returns Custom Bundle

Memphis Audio MMJ824 Marine Boat Mojo 8" Subwoofer+Mono Amplifier+Amp Wire Kit

Click Thumbnails to Enlarge

Condition and Warranty

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

Product Description

Package Includes:

  • (1) Memphis Audio MMJ824 Marine Boat Mojo 8" Subwoofer Sub 2 or 4 ohm selectable
  • (1) Rockville DBM13 3000 Watt Peak/750w RMS Mono Marine Amplifier 2 Ohm Amp+Remote
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit

Description:

MMJ824 subwoofers are the marine grade Mini MOJO subwoofers that the world has been begging for. These marine grade subs feature a plastic dust cap and rubber surround allowing them to resist water and the elements without altering the already impressive performance of these 8" subwoofers. Memphis stepped up the game by adding a striking RGB LED illuminated Memphis logo in the center of the cone for an eye-catching look on the water or in your side-by-side.

Features:

  • FLEX Selectable Impedance technology 2O or 4O
  • RGB LED back-lit emblem
  • Gold plated terminals
  • Polypropylene UV resistant cone
  • Diecast aluminum basket
  • Black stainless steel grill

Specifications:

  • SIZE (IN): 8
  • RMS/PEAK POWER: 600/1200
  • SENSITIVITY(Db): 83.6
  • MAGNET SIZE (Oz): 105
  • MOUNTING DEPTH: 5.75
  • CUT OUT DIAMETER: 7.35
  • VOICE COIL: 2

How To Install a Marine Amplifier onto Your Boat:

DBM13 PRODUCT VIDEO:


What's In The Box:

  • (1) DBM13 Amplifier
  • (1) Bass Remote
  • Birth sheet with Tested Power
  • Mounting Screws
  • Warranty Card
  • Owner’s Manual

Description:

The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best selling series of dB car amps and we added the best marine grade parts so that they will last and withstand even the harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

The dBM13 is a mono amplifier with 3,000 watts peak output and 750 watts certified RMS dyno-tested rated power at less than 1% THD. Here at Rockville we offer the best value in marine audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a marine amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. The dBM13 features a Maxi fuse with a rating of 80 Amps.

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dBM13 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

These amps are the best sounding out of any series we have ever created. We created them to be 2 ohm stable which is great for marine applications that use 1, 2, or more subwoofers.

We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).

Features:

  • Rockville DBM13 3000 Watt Peak/750w Dyno-Certified RMS Mono Marine Amplifier 2 Ohm Amp+Remote
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 2 Ohm: 750 Watts x 1 Channel
  • 4 Ohm: 450 Watts x 1 Channel
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 2 Ohm: 3000 Watts x 1 Channel
  • 4 Ohm: 1800 Watts x 1 Channel
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Adjustable Low Pass Filter: 50Hz - 250Hz
  • Adjustable Subsonic Filter: 15Hz - 55Hz
  • Adjustable Input Level Control
  • Fully Adjustable 12dB Bass Equalizer
  • Minimum THD at Rated Power: <0.1%
  • S/N Ratio: >90 dB
  • Frequency Response: 15Hz - 250Hz
  • Damping Factor: >150 @ 100Hz
  • 80 Amp Maxi Fuse
  • Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
  • Waterproof silicone covers for end panels
  • Rustproof Aluminum heatsink with white painted finish
  • Stainless steel end panels are rustproof
  • All screws and mounting hardware are stainless steel and rustproof
  • Bottom panel is aluminum and rustproof
  • High-Speed MOSFET Power Supply
  • Class "D" power supply
  • Phase Control Switch
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • RCA Input
  • 8 Volt Preamp Circuitry
  • Status Mode LED Indicator
  • Full IC-Controlled Protection Circuitry
  • Remote Dashboard Subwoofer Control
  • Product Dimensions (W x H x L): 9" x 2.4" x 14.7" inches
  • Product Weight: 7.8 Lbs

??


Video of RMWK:


Features:

  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25' Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties

Return Policy

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

  • We will send you a pre-paid shipping label to replace the item for a brand new one.
  • We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
  • If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.

Item Code: MMJ824+DBM13+RMWK4 V2

Home  /  About Us  /  Contact Us  /  Returns  /  FAQ's
Copyright © 2016 Audio Savings, All rights reserved.  |  eBay Template Design