Product Information:

 

10mm shank, 15 – 300mm dia. Internal max cut depth 34mm 100% high cemented carbide steel with central axis.

Made of cemented steel, which is four to seven times faster cutting than high speed steel.

It has stable mechanical properties, high wear resistance and high impact resistance,ensuring a long life.

Bi-Metal Hole Saw is designed for drilling metal sheet, drywall, plastic pipe, wood, PVC, and fiberboard hole.

Please clamp the shaft in right place and necessary protective measures in woodworking processing.

 

Non-binding clean edge design makes cuttings smooth and fast. More than that, the spring on the drill will automatically pushes the disc out of the saw immediately after completing the hole cutting

 

Our hole saws have superior performance and higher cutting strength than other hole saw in market.

- Size:14mm-300mm
- Material: M42
- Handle diameter: 10mm
- Opening depth: 25mm
- 5x57 Arbor Pilot Drill Bit fit 14-30mm Bi-Metal Hole Saw
- 6x57 Arbor Pilot Drill Bit fit 32-55mm Bi-Metal Hole Saw
- 6x68 Arbor Pilot Drill Bit fit 60-300mm Bi-Metal Hole Saw 

 

Tips:

1. Remember to add coolant when opening metal materials
2. When the positioning drill is drilled through, you need to pay attention to it, and then drill slowly.
3. If the operation process is abnormal or the chip discharge is not satisfactory, you need to stop the work, pour out the chips and continue to work
4.Don't use too much force when disassembling and assembling screws, so as not to screw the screw slip.
5. When processing thickness above 10mm, you need to remove the spring on the positioning drill.
6. Widely used in all kinds of table drills, drilling machines, Cordless Drill .

---

On 26/01/2024 at 16:43:47 AEDT, seller added the following information: