Please Note：This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
Technical Specification:
Plug Type: H7 (High Beam) + H7 (Low Beam) + H11 (fog light)
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Features:
100% New and Never Used
Super bright COB chip,360 degree clear beam no blind zone
IP Rate: IP68
Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
Built-in constant current CPU,instant full brightness without start-up relay
High quality Aluminum heat dissipation ensures the secure temperature range
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip
Shakeproof and Long lasting up to 50,000 Hours.
Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
Easy installation
Package Included:
4x H7 LED HeadLights Bulbs High Beam + Low Beam
2x H11 LED FogLight Bulbs
Technical Specification:
Plug Type: H7 (High Beam) + H7 (Low Beam) + H11 (fog light)
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Features:
100% New and Never Used
Super bright COB chip,360 degree clear beam no blind zone
IP Rate: IP68
Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
Built-in constant current CPU,instant full brightness without start-up relay
High quality Aluminum heat dissipation ensures the secure temperature range
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip
Shakeproof and Long lasting up to 50,000 Hours.
Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
Easy installation
Package Included:
4x H7 LED HeadLights Bulbs High Beam + Low Beam
2x H11 LED FogLight Bulbs
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
