5P13S 18650 Battery Bracket：
Specification：
Model：A-B bracket (two pieces/set）
Material: ABS+PC
Hole Diameter: 18.4mm
 Size: 258X90.9X8.2mm


48V 30A Lithium Battery BMS
Product Description:
Model: 13S 30A Lithium Battery BMS Board
Nominal Voltage: 52V
Charging Voltage: 54.6V
Discharging Current: 30A
Instantly protect Current：70A
Single Battery Over-discharge voltage：2.80±0.05V
Single Battery Over-charge voltage: 4.25±0.05V
Continuous Charging Current：10A
Charging Balance Current:46mA
Size:231*61*6mm
Feture: Overcharge protection, over-discharge protection, short-circuit protection, balanced charging, temperature protection, integration scheme, stable performance.
Application: for 13S Lithium Battery(18650/26650/32650/32700/Lithium Iron Phosphate Cell) Use in Solar Panel or Electric Boat Uninterrupted Power Supply 48V 52V

Notice:
1.Apply to Lithium Battery Pack Use,cannot use in Lifepo4 Battery.
2.Only the BMS Board,Battery Not Including!

Battery Pack PVC Heat Shrink：
1. PVC material is heat shrinkable, the thickness is 120MM. The length is 1 meter
2. Heating temperature: 85-105 (℃)
3Warm reminder: The length is 1M. The width is 210±3MM. Please accurately calculate the UR battery pack or machine.
4. PVC heat shrinkable tubing is a thin-walled, low-cost material with good electrical and mechanical properties. When exposed to high temperatures in excess of 98 degrees for a few seconds, the specially formulated PVC material shrinks quickly and evenly to conform to the shape of the object being covered.
5. Applications include insulation and sheathing of batteries, capacitors and similar objects - a wide range of applications in the production of industrial equipment, toys, sporting goods, electronics and consumer goods.

Instructions for use:
Use a hot air gun for shrinkage treatment; the temperature and time of the hot air gun are critical: if the temperature is low, the shrinkage will not be in place, and there will be creases. If it is high, it will melt.


Packing List:
1*1set 48V 13S6P Lithum Battery Box