1.Screw the Nut to a commercial CO2 gas cylinder and tighten it by wrench
2.The black pin valve screwed into S odastrem machine
3.Open the valve of the large gas bottle
4.Done,you can enjoy your sparkling water
if you want unscrew the pin valve from the machine:
1.Close valve of the large gas bottle
2.Press button more serval time to drain residual Co2(if you disconnect the coupler directly without this step,the o ring in quick coupler will be blowed out)
3.Disconnect the quick couplero
IMPORTANT NOTE:
please kindly read before you ordering or using:
1.Don't use siphon tube Co2 Tanks!! Our unit works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.
2. if you want disconnect the coupler,please press the machine button more serval time to drain residual gas,or else the o ring in coupler will be blowed out.
How to screw nut to CO2 gas tank:
Details:
1.Allows to use a standard DIN477/W21.8 large CO2 tank in most sodastream machines. Works with most Sodastream Soda Machines and allows normal operation without any permanent changes.
2.Save money on refills. This system allows you to connect your Soda-Club / Sodastream Machine to an external Non-Siphon CO2 Tank that has a DIN477/W21.8 Outlet Valve, like 5lb, 20LB or 50lb commercial CO2 tanks.
3.DN3 6mm Microbore Hose length 5ft(1.5 meter), high pressure hose (working pressure 630bar/9000psi).very soft,not easy to fold break.
4.Light weight only about 0.33kg.Compare to other heavy ones,it is easier to install.
This sodastream maker machine external hose kit with connector to connect with large Co2 tank:
DIN477 / W21.8-14(right hand) / JIS m22-14 Valve of CO2 Tank (KOR, JP, UK, Germany, France, Poland, Norway, Switzerland, Russia, Ukraine, South Africa, Sweden, Chile, Czech Republic, Singapore...)
