There will be 2 situations when you use this reptile thermostat:
'PV' is the current temperature
'SV' is the setting temperature
'TS' is your target value
'DS' is the differential value 'CA' is the calibrated value
'CF' is the unit of temperature (C or F)
'TR' is time setting ( 0:off / 1:on )
1. If you only need to control one temperature range the whole day:
Your ideal temperature range: is 22~25C, the settings are as follow:
TS1=25, DS1=3, CA=0, CF=C, TR=0
With this setting, when the PV actual temperature is lower than TS1-DS1=25-3=22C, the work light will turn on and your heaters will start outputting until the temperature reaches 25C (TS1/SV), and it will stop.
2. If you need to control different temperature ranges during day and night:
Your ideal temperature range: during 8:00~18:00, keep the temperature within 22~25C, during 18:00~8:00, keep the temperature within 27~25C
TS1=25, DS1=3, CA=0, CF=C, TR=1, TS2=27, DS2=2, TA=8, TB=18, TH=the hour of the current time when you set, TM= The minute of the current time when you set
During (8:00~18:00) TA~TB, the thermostat will work with TS1 and DS1. During (18:00~8:00) TB~TA, the thermostat will work with TS2 and DS2
Main Features:
①Sweet Spot for Speedy Germination
- The seedling warming mat is speeding up the germination of vegetables herb and flower seeds
- it will Warms the rooting area to improve sprouting and rooting.
②Good for Reptiles and Amphibians
- The pet heat mat can be mounted under the terrarium to heat it from below.
- It is particularly suited to glass tanks.
③Waterproof Material
- The seedling heating pad has passed MET standard certification and is used for electric heating safety.
- IP-67 protection level can prevent liquid and dust from entering.
④Package Included
- 1 x Heating Mat (EU Plug)
- 1x ITC-306T
Or
- 2 x Heating Mats (EU Plug)
- 1x ITC-306T
Specification:
- Material | PVC
- Input Power | AC 220-240V, 50/60Hz
- Max Current | 21 Watts
- Admission | 50.8 x 25.4 cm
- Certifications | UL/ETL/CE/RoHS
- Plug Type | EU Plug
- Heating Temperature Range | 10-20℃ Above the Ambient Temperature
- Waterproof Level | IP 67 Level
Please Note
- Because it is
just 21W, it does not heat as soon as you connect the power supply,
please wait for about 10 ~ 30 minutes, it will slowly warm up.
- Place your heat mat away from water and keep out of direct sunlight
- Do not put the hot objects on top of the mat
- Do not puncture or tear heat mat
- Do not wrap or cover with insulating material(s)
- Do not use outdoors.