Welcome to my store
This item will be shipped from Germany by DHL or UPS to European Union Customers.
Attention:
All goods price include VAT.I will make invoice for every order.
If you have VAT number,don't forget give me your VAT number and company name after payment.
If you don’t have VAT number,you buy it directly,I will make invoice by your ebay address.
3PC-----Nema 34 34SSM1460-EC1000 Closed-Loop Stepper motor 142mm 9N.M 1275oz.in 6A
3PC-----3m Cable
3PC-----2 phase nema34 Closed-Loop Stepper Drive HS86H Blue
1.NEMA 34 Closed-Loop Stepper motor 34SSM1460-EC1000
Artikelbeschreibung Item Description 34SSM1460-EC1000
Schrittwinkel | Step Angle | 1.8 ± 5% °/ Step |
Spannung | Rated Voltage | 2,4V |
Nennstrom | Rated Current | 6.00 A /Phase |
Widerstand pro Phase | Phase Resistance | 0.4± 10% ohm/Phase |
Induktanz pro Phase | Phase inductance | 4,2 ± 20% mH/Phase |
Drehmoment | Holding Torque | 9 Nm ≈ 1275 oz-in |
Rastmoment | Detent Torque | 12,5 N.cm Max |
Drehmoment | Rotor Torque | 2300 g- cm² |
Auflösung | Resolution | 1000 |
Wellendurchmesser | Shaft Diameter | Keyway Shaft Original Diameter=Φ 14,00± 0,012 mm Keyway=5*5*25C |
Motorlänge | Motor Length | 142mm(Motor Length+Encoder Length) |
Leitungsverbindung (Bitte sehen Sie das Bild) | Wires Connection (Please see the picture) | Motor Connection: Black A+ , Red A-, Yellow B+, Blue B- Encoder Connection: PB- = Yellow, PB+= Green PA- = Black, PA+= Blue VCC=Red, GND= White |
Gewicht | Motor Weight | 4,09 kg |
2.NEMA 34 Closed-Loop Stepper motor driver HS86H V3.3
Input Voltage/ Eingangsspannung
AC: 24-80 VAC
DC: 24-110 VDC (60VDC typisch)
Microstep Setting/ Unterteilungsbereich
200-51200ppr(16 Microsteps)
Output Current/ Ausgangsstrom
0.5-13A
Input Pulse Frequency/ Impulsantwort Frequenz
0-500 kHz (.)
Signal Current
7-20 mA
Storage Environment
-20 ℃ - +65 ℃
Humidity
Not condensation, no water droplets
Weight
680g
Using Environment
-5 ℃– 45 ℃, avoid dust and corrosive gas
2.The system includes a two-phase stepper motor all-digital, high-performance drive, which is used to close the real-time position, velocity and current loop servo system as internal encoder combined. It combines servo and stepper motor technology, and both offer unique capabilities and enhancements, but at a fraction of the cost of a servo system.
3.Its quick response and great features make it ideal for hunting does not apply, such as bonding and visual systems, including a short distance fast motion is required, hunting will be a problem. It is an ideal application by belt or other mechanism has a low rigidity and you do not want it to vibrate when parking.
Function
1.HS86H 2-phase hybrid servo drive
2.24-110VDC/24-80VAC
3.No adjustment, simultaneous loss null
4.Closed circulation, eliminate the loss of synchronization
5.Broader operating range, higher torque and higher speeds
6.Reduced motor heating and more efficient
7.Smooth movement and low noise motor
8.Do do not require high torque margin
9.No adjustment and is always stable
In the standing start and low speed, high torque rigidity
11.Lower costs
Typical applications:
For a variety of small and medium sized automation equipment and instruments, such as: engraving machine, stripping machine, marking machine, cutting machine, laser machines, plotters, medical equipment, machine tools, automatic assembly equipment, electronic processing equipment. In user expectations low noise, high speed device applications particularly good effect.
3.Power Supply
Power Supply 350W-60V, input voltage 90~132VAC/180-264VAC, output voltage 60VDC
4.Breakout Board
Description:
• Built in DB25 male connector.
• DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
• DB25 Input Pin: P10,P11,P12,P13,P15.
• DB25 GND Pin: P18-P25.
• Power supply: +5V DC.
• Built in C-class Optical-coupler.
• High quality with Surface-mount Tech
P2 P3 is set to X-axis for the X-axis pulse
P4 P5 is set to Y-axis, Y axis pulse
P6 P7 is set to Z-axis Z-axis pulse
The other can be set to A B C axis
A-axis pulse P8 P9 is set as the A axis
P14 is set to B-axis B-axis pulse P1
P16 P17 is set to C-axis, C axis pulse
Can also be set to the spindle control signal \ electrical permit
Input interface for the P10 P11 P12 P13 P15
Additional instructions:
1.About VAT invoice:Usually I will make invoice every Friday.
Now ebay doesn't show e-mail.If you want invoice,you give me your e-mail,I can send invoice to your e-mail
2.Delivery time:All products are available and can be shipped out right after payment.
I only make ship on work day(Except Saturday、Sunday and Holiday).
- Shipping via DHL or UPS.
After delivery,for Germany,about 2~3 work days.
After delivery,for EU country,usually about 5~7 work days, if you not receive goods at the Eighth work day,you search the tracking on DHL or UPS website.If the tracking has problem,you make a call to your local DHL or UPS,then contact me .
3.Service: If you need more pictures, descriptions, manual, please contact me.
If you have problem,when you connect it,you contact me,I will help you.
Application:Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. Carver machine ,Dispenser,Automazation,3D Printer,Stage lighting,instrument,laser equipment,scanner Dispenser,Logistics equipment,and so on.These motors have been used in precision telescope positioning systems and robots.