Details
This is DIY Acrylic Case for 6J1 Valve Preamp Tube PreAmplifier Board Headphone Amplifier Buffer
Features:
This machine uses a single 12V AC input by circuit processing provides 6J1 tubes needed positive and negative voltage and filament supply voltage.
Fever gall preamp circuit board is a principle of imitation crew Musical Fidelity X-10D design, to be rational optimization, performance is more stable than the original machine, tube play to improve ten percent.
Power works: a turn on the power tube filament heating is started, when the boost voltage starts from zero boost, and other hot filament tube, and also happens to boost boost finished, so this is the same with bile rectifier, 8 470UF capacitor filter is very clean, good power supply system will not have a hum, the filament is 12V DC power supply requires two filament tube is connected in series with a DC filament also to reduce noise.
6J1 Tube Buffer 0.85 times magnification, connected between the source and before or after class, can effectively filter digital flavor.
Spefications:
Channel: 2.0 / stereo
Power input:AC 12V 0.8 A / 5.5 * 2.5 plug
Switch function: the power switch/volume
Size:77 x 75 x 52 mm
Instructions:
1, AC 12V input: The DC3.5 / 5.5 * 2.1 socket, 12V AC power adapter, if you use non-plug AC 12V transformer, power cord need to solder on the circuit board. Remember: You can not use a DC power input, otherwise it does not work!
2, the left-channel input / right channel input: audio signal input, can be connected to mobile phones, computers, M3, the MP4, and other music players.
3, the left channel output / right channel output: an audio signal output terminal can be connected to the audio signal input amplifier, power amplifier board.
4, the power switch / volume knob: turn the knob counter-clockwise to decrease the volume beginning, when the volume down to the minimum, if it continues to rotate until the "ticking" sound, then the power off, the light goes off; in the closed state, Turn the knob clockwise to hear "tick" sound, light is on, the power is turned on, then the volume is minimal, then continue clockwise rotation is to increase the volume.
Package Included:
1× Acrylic Case ( Not Included Board )
We only accept your Ebay Address, Please Make sure it's 100% right.
The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2017 DataCaciques
Item Description
This is DIY Acrylic Case for 6J1 Valve Preamp Tube PreAmplifier Board Headphone Amplifier Buffer
Features:
This machine uses a single 12V AC input by circuit processing provides 6J1 tubes needed positive and negative voltage and filament supply voltage.
Fever gall preamp circuit board is a principle of imitation crew Musical Fidelity X-10D design, to be rational optimization, performance is more stable than the original machine, tube play to improve ten percent.
Power works: a turn on the power tube filament heating is started, when the boost voltage starts from zero boost, and other hot filament tube, and also happens to boost boost finished, so this is the same with bile rectifier, 8 470UF capacitor filter is very clean, good power supply system will not have a hum, the filament is 12V DC power supply requires two filament tube is connected in series with a DC filament also to reduce noise.
6J1 Tube Buffer 0.85 times magnification, connected between the source and before or after class, can effectively filter digital flavor.
Spefications:
Channel: 2.0 / stereo
Power input:AC 12V 0.8 A / 5.5 * 2.5 plug
Switch function: the power switch/volume
Size:77 x 75 x 52 mm
Instructions:
1, AC 12V input: The DC3.5 / 5.5 * 2.1 socket, 12V AC power adapter, if you use non-plug AC 12V transformer, power cord need to solder on the circuit board. Remember: You can not use a DC power input, otherwise it does not work!
2, the left-channel input / right channel input: audio signal input, can be connected to mobile phones, computers, M3, the MP4, and other music players.
3, the left channel output / right channel output: an audio signal output terminal can be connected to the audio signal input amplifier, power amplifier board.
4, the power switch / volume knob: turn the knob counter-clockwise to decrease the volume beginning, when the volume down to the minimum, if it continues to rotate until the "ticking" sound, then the power off, the light goes off; in the closed state, Turn the knob clockwise to hear "tick" sound, light is on, the power is turned on, then the volume is minimal, then continue clockwise rotation is to increase the volume.
Package Included:
1× Acrylic Case ( Not Included Board )
Payment
1.We only accept payment from PayPal.
2.Please make sure your eBay address is correct before you pay.
3.All payment Should be Completed within 7 days, or an unpaid disputed will be opened as payment none receive.
4.If you do not want to pay for the order please contact us via eBay message, we will help your cancel the transaction.
Shipping
1. We only ship to confirmed PayPal addresses.
2. Economy Shipping, with no tracking number.
Standard Shipping, with tracking number.
Express (Expedited) Shipping, with tracking number.
3. Economy shipping needs 2-5 weeks to arrive mostly.
In rare case, it can take up to 6-8 weeks.
It depends on your location and local postal service, as well as the weather condition along the shipping.
4. If you need a faster delivery time, you could choose
Express (Expedited) Shipping.
If you need a tracking number, you could choose Standard Shipping.
Return
1. We offer 60 day money back or replacement guarantee.
In addition, it allows customers to return new and unused products in their original factory condition for any reason within 60 days from the date of purchase.
2. Although we test each item and they are packed professionally, few item(less than 0.1%) might be damaged during the shipping. Please feel free to contact us within 4 days after you receive your package about replacement.
3. If you don't receive items over 35days ,please make sure to contact us before leaving any neutral or negative feedback.We'll try our best to help you solve the problem.
If we authorized the return, customers will get an email with instructions for returning the item. Email will be replied within 24 hours on Chinese business hours.
The sole and exclusive maximum liability to lifesteward arising from any product sold on lifesteward ebay account shall be the price of the product ordered.
Feeback
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.