Because of the high temperature and high pressure inside the equipment, please strictly follow this precautions to correctly and safely operate this equipment.
Package list:
1 * Pure Sine Wave Inverter
1 * Black&Red Wire
1 * User Manual
Model No. | 2000W-12V |
Continuous Output Power | 2000W |
Max Output Power | 4000W |
DC Input Voltage | DC 12V |
DC Working Voltage | 10-15V |
DC Input Low Voltage Protection |
10±0.5V |
DC Input Over Voltage Protection |
14.5±0.5V |
AC Output Voltage | 240V±5% |
Frequency | 50Hz±0.5Hz |
Efficiency | 90% |
No Load current Draw | ≤ 0.6A |
Output Wave Form | Pure Sine Wave |
Inversion Efficiency | >90% |
Temperature Protection | (35±5) |
Input Low Voltage Protection | YES |
Full Load Protection | YES |
Output Short Circuit Protection | YES |
Overload Protection | YES |
Net weight | 3.5kg |
Size | 310*180*70 mm |
Safety Precautions:
The range of working temperature of inverter should be -20℃~40℃. The inverter should not be operated at full load in the environment over 40℃. If it is required to be operated in the environment over 40℃, please follow the specification of 100% decrease at excessive 1℃.
The optimal working temperature of battery is 20℃~30℃. The application of battery in the environment over 30℃ will reduce its service life, while the application in the environment less than 20℃ will shorten its backup time.
The front and back panel of inverter should be 60mm away from the wall or adjacent equipment at least.Do not cover the ventilation holes on the front and back panel of inverter, otherwise it will obstacle the ventilation and heat dissipation and thus increase the temperature inside the equipment and affect its service life.
It should be confirmed that the switch of inverter is off and the equipment is placed properly before the electrical cable connection.
Do not reverse the positive and negative connection, otherwise it may damage the inverter.
The procedure for electrical cable connection of inverter is as follows:
Put the switch of inverter at OFF state.
Connect the terminals of storage battery to the positive and negative poles of storage battery: the positive terminal of storage battery should be connected to the positive pole, while the negative terminal of storage battery should be connected to the negative pole.
It should be confirmed that the connection between the terminals and poles of storage battery is well, otherwise it may cause the heating of cable.
Turn on the switch and start the inverter.
Connect the load with the AC output socket on the output side panel of inverter.