Inkbird IHC-200 Moisture Regulator

What is IHC-200?

IHC-200 is an easy to use, safe and reliable dual relay output humidity controller. Its play-n-plug design allows two LED screens to

be humanised. IHC-200 can control any 100-265 volt humidifier, dehumidifier or fan.

Main Features:

IHC-200 moisture regulator.

Moisture measuring range: 0 ~ 100% RH humidity setting range: 0 ~ 100% RH ambient temperature: -30 ~ 75 °C, humidity calibrated 

within +/- 3% RH at 55% RH, response time (at 63% of the signal) 33% RH to 75% RH (3): 5 seconds.

Humidity regulator probe.

Sensor model: HTG3535CHSensor wear: < 0.5% RLF/yrSensor cable length: 2 m / 6.56 ft. Reliability not affected by repeated compressions. 

Typical 1-3.6 V DC output for 0 to 100% at RH 5 V DC supply.

Plug socket.

Power supply: 5 VDC proven reliability and long-term stability, dimensions: device dimensions (140 x 68 x 33 mm), socket (135 x 54 x 40 mm).

Power cable.

Input voltage: 100 ~ 240 V AC, 50 Hz/60 Hz, connection cable length: 1.5 m (5 ft), connection cable length: 30 cm (1 ft).

Description:

Inkbird IHC-200 Moisture Regulator

Switch the modes between humidification and dehumidification automatically; control humidity by setting value and differential value;

calibrate the humidity value; delay protection for control output; request current temperature; alarm when the humidity exceeds 

high/low humidity setting value; alarm in case of sensor error or humidity limit;

What You Get:

• 1x IHC-200 Humidity Controller
• 1x Humidity Sensor