Specifications:
Plug Type: EU/US Plug
voltage: AC110/220V
power: 80 W
Color: Black
Material: Plastic + Stainless Steel + High Temperature Silicone
Display: LCD
Temperature Range: 180 ~ 480 ℃
Temperature stability: ± 10 ℃
Type of heating: Internal heating
Soldering Tip: 900 M Series
Wire Length: 1.5 m /59in
Soldering Iron Size: Approx. 20 * 2 * 2 cm / 7.87 * 0.79 * 0.79in
Instruction:
Press the "+" button once to increase 1℃; press and hold it to increase temperature continuously.
Press the "-" button once to reduce 1℃; press and hold it to reduce temperature continuously.
The newly set temperature will be saved after 3 seconds, and iron will keep the temperature for next time powering-on.
When "℉" or "℃" symbol flashes, it means the heating core has not reached the set temperature.
Temperature Correction:
1. After 90 seconds of powering on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good contact (recommended soldering iron temperature is 300 ~ 350℃ for correction)
2. When thermometer displays a stable temperature(about 2 ~ 3 seconds), write down the temperature.
3. Move soldering iron away from thermometer; press the "-" and "+" button at the same time to enter temperature correction interface.
4. Input adjustment quantity. Adjustment quantity= set temperature - measured temperature (see example)
5. Press the "-" and "+" at the same time to exit temperature interface, finished.
Example 1, when setting temperature is 320 ℃ while measured temperature is 312 ℃, the correction steps are as follows:
a, press the "-" and "+" at the same time to enter temperature correction interface.
b, press the "+" button till the LCD displays 8℃.
c, press the "-" and "+" at the same time to exit temperature correction interface
Example 2, when setting temperature is 320 ℃ while measured temperature is 330 ℃, the correction steps are as follows:
a, press the "-" and "+" at the same time to enter temperature correction interface.
b, press the "-" button till the LCD displays -10℃.
c, press the "-" and "+" at the same time to exit temperature correction interface
Packet including:
1 * Electric Welding Iron + 5 pcs Iron Tips or Only 5pcs Iron Tips
