This product can replace various rubber pads, asbestos pads, cork pads, and paper pads, and can be used for various mechanical equipment
The engine, gearbox, axle, and flange joint surfaces of spare cars and motorcycles are solid
Sealed, it is not limited by the size and shape of the joint surface and is widely applicable to various parts of machinery
The sealing is leak proof.
Product Features
It is a kind of easy peeling one component room temperature curing silicone rubber with good thixotropy and neutral
No corrosion, easy for secondary assembly and maintenance; High temperature, high pressure, solvent resistance, low shrinkage
No characteristics such as collapse. Suitable for adhesive sealing with large gaps (0-6mm), which can be adjusted according to the mechanical interior
The flange shape of the component is directly sealed with adhesive, eliminating various gaskets, providing waterproofing, oil resistance, impact resistance
Vibration and other effects.
matters needing attention
1. Curing requires moist air and may take a long time in situations with large bonding areas.
2. After the operation is completed, the unused adhesive should be immediately tightened and sealed for storage. Reuse
If there is a small amount of scaling at the sealing area, it can be removed without affecting normal use.
3. Avoid contact with eyes, skin, and clothing. Immediately rinse with soap and water after skin contact.
If it accidentally splashes into the eyes, please immediately rinse with plenty of water. If you still feel unwell, go to the hospital
Check.
4. If using a dispensing machine for gluing, it is recommended to soak the dispensing needle in a solution containing
In containers with silicone oil, prevent solidification and blockage of the needle, and remove the small amount of needle when operating again
Just measure the glue.
Package content:
1 * Silicone red glue
1 * Silicone red glue
On Apr 17, 2023 at 03:12:56 PDT, seller added the following information:
