Feature：
-Avoiding movements:Professional tool makes sure flatness between tiles during the mortar setting.
-Good quality :Made of high quality plastic and stainless steel which is wear-resistant and better hardness than 304 steel.
-Reusable & Money-saving
-Widely use :For Building ,Walls and Floors.
-Easily installed：1.Lay the first piece of brick, seam ≥2mm or above, and close to second bricks, Insert the T-pin along the crack.
2.Insert the T-needle along the crack, then rotate it to 90 degrees.
3.Tighten the adjusting cover so that the two bricks are in the same level.
4.Wait about 4-5 hours after leveling.
5.Before the cement or tile glue has completely dried up(usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
6.Remove the leveler, clean and dry storage for reuse.

Specification：
Size:orange Spacers :2.8*7.8cm/1.1”*3.07”, black bottom:3.7*2.3cm/1.46”*0.9”
Steel Pins:1*0.15cm/0.39”*0.059”
Special Wrenches:15.5*3.4cm/6.1”*1.34”
Color: black and orange

Package included：
50/100/150/200/250/500pcs *Tile Spacers 
50/100/150/200/250/500 pcs *Steel Pins
1/2/3/4/5/10 *Special Wrenches

50 Steel Pins Only
Feature:
1. Wear-resistant, recyclable, and can improve the installation speed of tiles.
2. Reduces the need for grinding and polishing, prevents tile from moving during solidification.
3. Easy to carry and easy to use in DIY operations, reducing the need for grinding and polishing and the fatigue and stress of installers.

Specification:
Color: Silver
Material: Manganese steel
Steel needle length: 32mm/1.26 inches
Steel needle thickness: About 2mm
Pieces: 50
Weight: 45g

Use tips:
1. Insert the steel needle into the gap of the tile, twist the leveling machine handle to rotate 90 degrees.
2. Tighten and rotate the nut to the right, adjust the height between the tiles, use a wrench for reinforcement.
3. After leveling, about 5-6 hours, before the cement and adhesive are completely dry, reverse the rotation of the leveler and take out the steel needle.

Package include:
50pcs×steel needle